Blue 3D-printed construction kit parts laid out on a light wooden table: eight long beams with seven holes, four short beams with three holes, twenty snap pins, a hex bolt and two nuts, beside an orange ping-pong ball and a sheet of squared paper.
Build Bag Starter Check the fit.
Build a grabber.
Snap pins

Print facts

Print time
3 h 28 min
Filament
69 g
Plates
2
Builds
Grabber
Supports
None
Set up for
P2S

01About

The first two plates of the Build Bag, our printable engineering kit: a Fit Test, and the Start Here plate with 8 long beams, 4 short beams, 20 snap pins, a bolt and two nuts.

Print the Fit Test first (28 minutes). It has a normal, a tight and a loose snap pin, marked by notches on the head, so you can see which fits your printer best before printing anything bigger.

The Start Here plate builds the Reach Grabber: four X shapes pinned end to end. Squeeze the handles and it stretches out to grab a ping-pong ball. Build-Guide.pdf shows it step by step, along with the five other machines the full Build Bag makes.

Every part is on the same 15 mm grid as the full Build Bag, so everything you print here is part of the kit when you get the rest.

  • Free with an account
  • A Fit Test for your printer
  • Builds the Reach Grabber
  • Tight and loose pins included
  • Part of the full Build Bag
  • Sell the prints you make
  • Kids
  • STEM
  • Construction kit
  • Free
  1. Open the 3MF in Bambu Studio

    Open it as a project (File, then Open Project). The printer, plate and settings are already saved, so there's nothing to set up. Printing on another brand? Use the STL files with the settings below.

  2. Load your filament

    You need two colors:

    • Start HereBlue
    • Fit TestAny color
  3. Print

    Print everything on the list below, then put it together.

Keep the scale at 100%: every part shares the Build Bag's 15 mm grid. Print the Fit Test first, and if the normal pin is too tight or too loose, replace the pins on plate 01 with the tight or loose pin file from Parts/.

Printing on another printer or slicer? See the settings

The 3MF projects have these settings saved for a Bambu Lab P2S. Using the STL on another printer? These are the settings it was made with.

Printer
Bambu Lab P2S, 0.4 mm nozzle, textured PEI plate
Material
PLA, with calibrated flow
Layer height
0.20 mm, first layer 0.20 mm
Walls
3, with 4 top and 4 bottom layers
Infill
15% gyroid for beams; pins, bolts, nuts, the collar and axle stub 100%
Supports
None; no brim
Orientation
As supplied: pins on their flats, bolts on their heads, beams flat
Colors
One color per plate, any color you like

03What to print

35 parts, plus the fit test. Print 00 first, then 01:

PartHow manyColor
Print first: a beam, three pins, an axle stub, a collar, a short bolt and a nut00 Fit Test8 samplesAny color
8 long beams, 4 short beams, 20 snap pins, 1 bolt, 2 nuts01 Start Here35 partsBlue

00 about 28 min and 7 g, 01 about 3 h and 62 g. Pick one format, the 3MF or the STL, not both.

04Building the grabber

  1. Check the fit

    Push the normal pin from the Fit Test through two beams: it should snap in, turn freely and come out when you squeeze its split end. Too tight or too loose? Use the tight or loose pins instead.

  2. Make the X shapes

    Pin two long beams together through their middle holes to make an X. Make four, then pin them end to end, top ends together and bottom ends together.

  3. Add handles and jaws

    Pin two short beams at the back as handles and two at the front as jaws. Stand the bolt up with two nuts on it, set a ball on top, then squeeze the handles to reach out and grab it.

Build-Guide.pdf has every step with pictures. Small parts: not for children under 3, and an adult should help younger builders. This is a printable kit, not a safety-certified toy.

05Selling your prints

Every download comes with a license that lets you sell the physical prints you make. The full terms are in LICENSE.txt inside the ZIP.

You can

  • Print it for yourself, family and friends, and as gifts
  • Sell physical prints, with no quantity limit or royalty
  • Change the files for your own printing, and sell prints of those too
  • Use your own photos of your prints to sell them

You can't

  • Share, upload, sell or give away the files, or remixes of them
  • Pass the files on with a print you sell
  • Claim the design as yours, or imply 3MF Labs endorses your shop

Want a friend to have the files? Send them this page. It's free for them too. Read the full license

What buyers say

Hundreds of sales so far, and buyers keep leaving 5-star reviews.

  • Perfect all around. Great designs, great price, can't say enough. Do recommend and will buy more!

    High Temp Arts, Holiday earrings
  • Customer service is outstanding! Went above and beyond expectations along with the files I purchased.

    Etsy buyer
  • Super cute files and easy to use!

    Etsy buyer, Christmas ornaments

Read every review on Etsy

Build Bag

More Build Bag designs

See them all
Snowflake Coaster Set Valentine Heart Garland Couple Puzzle Keychains Heart Gear Fidget

97 new designs in the last 30 days

Every new design, for $9.99 a month.

Members get every design we release, two older designs free the day they join, and 40% off the rest. Every file comes with the license to sell your prints.

Cancel any time. What you download stays yours. See what members get