Build Bag
Print one bag.
Build six machines.
Beams, gears, wheels and pins that all fit together on one 15 mm grid. Print the bag once, then follow the builds step by step, or make up your own.
- 103 parts on one 15 mm grid
- Prints on a standard 0.4 mm nozzle
Step 1
The library
Six machines to build first
Pick one and it builds itself, step by step. Use the arrows to go at your own pace, then spin it round to see how it all fits.
Crank Crane
Gears and pulleys
How it works
Try this
You add
Parts used
3MF Labs specials
Not just straight bars
A few parts you won't find in a box of beams. They're what make a build look like a car or a claw machine instead of a frame. In the 3D views they're the lime ones.
Racer shell
A car body that bolts onto the racer frame with the bag's four bolts. More shells are on the way.
Claws
Curved jaws that pin onto the grabber, or onto any arm, so it can hold on to a ball.
Turntable
A round plate with 12 holes and a hex centre. Spin it, steer with it, or pin a propeller on.
Angle beam
An L-shaped beam for corners, legs and frames that need a bend.
Corner bracket
Joins two parts at a right angle, so a build can have a floor, a deck or a roof.
How the parts fit
Six rules, and you can build anything
Everything is 15 mm apart
Every hole on every part is 15 mm from the next one, so any part joins any other.
Round holes spin, hex holes grip
An axle turns freely in a round hole. Gears, wheels and the crank have hex holes, so they turn with the axle.
Pins pivot, bolts lock
A snap pin makes a joint that moves. A bolt and nut clamp two parts so they stay put.
Gears mesh on the grid
Gears whose teeth add up to 20, 40 or 60 fit a whole number of holes apart: 10 and 30 sit 2 holes apart, 20 and 40 sit 3.
Collars hold things in place
Slide one onto an axle to stop a wheel or a gear sliding off.
Every layer is 6 mm
A snap pin joins two layers and a long pin joins three, so stacks always line up.
Printing it
About 20 hours, over a few evenings
Every part prints on a 0.4 mm nozzle, one color per plate, no supports except a few under the racer shell. The plates are laid out so there's something to build after the first one.
- 00
Fit Test28 min
Print this first: a beam, three pins, an axle, a collar and a bolt to check the fit on your printer.
- 01
Start Here3 h
Everything the Reach Grabber needs, so there is something to build after the first print.
- 02
Beams2 h 14 min
The long beams and the rest of the short ones.
- 03
Plates and Wheels3 h 57 min
The plates, the four wheels, both pulleys and the crank.
- 04
Gears and Bucket1 h 44 min
All six gears and the bucket.
- 05
Axles and Collars1 h 1 min
Four short and four long hex axles, and eight collars.
- 06
Long Pins and Bolts42 min
Long pins, bolts, nuts and the hook.
- 07
Specials1 h 49 min
The claws, the turntable, the angle beams and the corner brackets.
- 08
Racer Shell5 h 32 min
The car body that bolts onto the racer.
The files
Get the Build Bag
STL and print-ready 3MF for all 103 parts, every part on its own for spares, and Build-Guide.pdf with every step of the six builds. Like every 3MF Labs design, you can sell what you print.
Small parts: not for children under 3.