Flick a leaf.
Print facts
- Print time
- 1 h 3 min
- Filament
- 29 g
- Colors
- 1
- Supports
- None
- Assembly
- None
- Set up for
- P2S
01About
A fall spinner about 7.5 cm (3 in) across and 1 cm thick: three rounded maple leaves with engraved veins around a low centre cap with a raised crosshatch, like the cap of an acorn.
The leaves spin around the captive centre hub on a printed bearing: it comes off the plate already joined, so there is no metal bearing to buy and nothing to put together. Pinch the hub, flick a leaf and it spins.
It prints in one color with no supports. A plate of four spinners is included too, for fall party favors, classroom treats or the Thanksgiving kids' table.
It comes as a Bambu Studio project for a P2S and as STL. The license lets you sell the spinners you make.
- Prints in place, already spinning
- No metal bearing or assembly
- One color, no supports
- One spinner or a plate of four
- About 7.5 cm (3 in) across
- Sell the prints you make
02How to print
Open the 3MF in Bambu Studio
Open it as a project (File, then Open Project). The printer, plate and settings are already saved, so there's nothing to set up. Printing on another brand? Use the STL files with the settings below.
Load your filament
One color:
- SpinnerPumpkin orange
Print
Print it flat as supplied at 100% scale, with supports off.
Keep the scale at 100% (changing the size changes the bearing gap), print it flat exactly as supplied and keep the hub and leaves where they are. Too much first-layer squish can close the gap, so calibrate your flow first.
Printing on another printer or slicer? See the settings
The 3MF projects have these settings saved for a Bambu Lab P2S. Using the STL on another printer? These are the settings it was made with.
- Printer
- Bambu Lab P2S, 0.4 mm nozzle, textured PEI plate
- Material
- Regular PLA, well calibrated
- Layer height
- 0.20 mm, first layer 0.20 mm
- Walls
- 3, with 5 top and 5 bottom layers
- Infill
- 100%, so the weight in the leaves keeps it spinning
- Supports
- Off, and no raft or brim
- First layer
- 20 mm/s, elephant-foot compensation 0.15 mm
- Colors
- One color, pumpkin orange in the project (any PLA color works)
03What to print
1 spinner. Print 01 for one spinner, or 02 for four at once:
| Part | How many | Color |
|---|---|---|
| One spinner, 73 x 73 x 11 mm01-Autumn-Leaf-Fidget-Spinner | 1 spinner | Pumpkin orange |
| Four spinners on one plate02-Autumn-Leaf-Fidget-Spinner-4-Pack | 4 spinners | Pumpkin orange |
About 1 h 3 min and 29 g for one spinner, 3 h 50 min and 116 g for four. Pick one format, the 3MF or the STL, not both.
04Getting it spinning
Let it cool
Let the plate and the print cool fully, then flex the plate gently and lift the hub and leaves off together. Don't pull on the leaf tips.
Free the bearing
Hold the round hub and twist the leaves gently a few turns each way until they turn freely.
Spin
Pinch the centre hub between thumb and finger and flick a leaf. Keep your fingers on the hub, away from the spinning leaves.
No oil or glue is needed. If it sticks, check that supports were off and the scale was 100%; don't pry the hub out or force it with tools. Keep PLA away from heat, and keep small or broken parts away from young children and pets.
05Selling your prints
Every download comes with a license that lets you sell the physical prints you make. The full terms are in LICENSE.txt inside the ZIP.
You can
- Print it for yourself, family and friends, and as gifts
- Sell physical prints, with no quantity limit or royalty
- Change the files for your own printing, and sell prints of those too
- Use your own photos of your prints to sell them
You can't
- Share, upload, sell or give away the files, or remixes of them
- Pass the files on with a print you sell
- Claim the design as yours, or imply 3MF Labs endorses your shop
Want a friend to have the files? Send them this page. Read the full license
$3.79
3ML-078 · Earring collection
Fall Earrings
Four pairs of fall earrings: sunflowers, toadstool mushrooms, pumpkin spice lattes and owls. STL + 3MF · 1.4 MB View model
$2.49
3ML-071 · Fidget spinner
Turkey Fidget Spinner
Eight tail feathers spin around a turkey-face hub. It prints in place in one piece: no metal bearing, no assembly. STL + 3MF · 5.6 MB View model
$3.79
3ML-014 · Lantern panels
Harvest Lantern Panels
Four light-up Thanksgiving scenes for our Modular Lantern: a pumpkin patch under the harvest moon, a turkey, falling leaves and acorns. STL + 3MF · 3.7 MB View model
$3.79
3ML-015 · Earring collection
Thanksgiving Earrings
Four pairs of Thanksgiving earrings: turkeys, pumpkin pie slices, maple leaves and acorns. STL + 3MF · 5.0 MB View model
$3.79
3ML-017 · Candy bowl