3MFLABS
Sign up freeSign up
The Harvest Lantern Panels glowing in a coffee-brown 3D-printed lantern on a rustic harvest table: a harvest moon over a pumpkin patch, and a turkey on a fence rail, among pumpkins and maple leaves.
Harvest Panels Give thanks.
Let it glow.
4 scenes, swap any time
Scene 1 of 4, Pumpkin patch: a big harvest moon over a hill of pumpkins with curling vines, glowing warm yellow in the coffee-brown Modular Lantern.
Scene 1 of 4Pumpkin patch
Scene 2 of 4, Turkey: a strutting turkey with its tail fanned on a wooden fence rail, glowing pumpkin orange in the coffee-brown Modular Lantern.
Scene 2 of 4Turkey
Scene 3 of 4, Falling leaves: maple leaves on a branch and drifting down, glowing red-orange in the coffee-brown Modular Lantern.
Scene 3 of 4Falling leaves
Scene 4 of 4, Acorns: an oak branch with oak leaves and hanging acorns, glowing golden olive in the coffee-brown Modular Lantern.
Scene 4 of 4Acorns

Print facts

Panels
4
Panel size
90 × 120 mm
Colors
2
Prints
1 plate
Supports
None
Set up for
P2S + AMS

01About

Four Thanksgiving scenes for our Modular Lantern: a big harvest moon over a pumpkin patch, a strutting turkey on a fence rail, maple leaves falling from a branch, and an oak branch with acorns. Each panel is a single print: a thin backing in a light-colored filament that glows when the lantern is lit, with raised black artwork on top.

The panels slide into the Modular Lantern Frame in place of any others, so you can change the scenes with the season. This is the panel set only: get the frame on its own, or add it when you buy the panels.

Every panel comes as a Bambu Studio project set up for a P2S with an AMS, and as an STL for any other slicer. Print all four on one plate, or one at a time to give each its own glow color. The license lets you sell the prints you make.

  • Four scenes: Pumpkin Patch, Turkey, Falling Leaves, Acorns
  • Glowing panels: a light backing and black artwork in one print
  • Slide into the Modular Lantern frame, no tools or glue
  • All four on one plate, or one at a time in different colors
  • Each panel 90 × 120 mm
  • Sell the prints you make
  • Thanksgiving
  • Fall decor
  • Lantern panels
  • Light-up

  1. Open the 3MF in Bambu Studio

    Open it as a project (File, then Open Project). The printer, plate and settings are already saved, so there's nothing to set up. Printing on another brand? Use the STL files with the settings below.

  2. Load your filament

    You need two colors:

    • Raised artworkBlack
    • Panel backingWarm yellow, pumpkin orange, red-orange or golden olive

  3. Print

    Print everything on the list below, then put it together.

Printing from the STL? Start in your backing color and add a filament change after layer 3 (Z = 0.60 mm), before the first black layer at 0.80 mm. The backing colors in What to print are suggestions; any light color glows. Keep the scale at 100%, or the panels won't fit the frame's grooves.

Printing on another printer or slicer? See the settings

The 3MF projects have all of this saved for a Bambu Lab P2S. Using the STLs on another printer? These are the settings they were made with.

Printer
Bambu Lab P2S, 0.4 mm nozzle, textured PEI plate
Material
PLA; a translucent backing filament glows best
Layer height
0.20 mm, first layer 0.20 mm, no adaptive layers
Walls
3
Infill
15%
Supports
Off
First layer
20 mm/s walls, 30 mm/s infill
Orientation
Flat, backing on the bed, artwork facing up

03What to print

4 panels. All four sides of one lantern:

PartHow manyColor
Pumpkin patch01-Pumpkin-Patch1×Warm yellow
Turkey02-Turkey1×Pumpkin orange
Falling leaves03-Falling-Leaves1×Red-orange
Acorns04-Acorns1×Golden olive

Rather print them together? 00-All-Four-Same-Background holds the same four panels on one plate, all in one backing color. Use the 3MF projects or the STLs, not both.

04Putting it together

  1. Print the panels

    Print 01 to 04 once each, or the all-four plate once. They print flat, backing down, and switch to black after the third layer: by themselves with an AMS, or at a filament change you add.

  2. Clean them up

    Let the panels cool before you lift them off the plate. Remove any strings, but leave the edges as they are so the panels still fit.

  3. Open the lantern

    Press the roof's thumb pad down, slide the roof 12 mm to the right and lift it off.

  4. Slide the panels in

    Slide one panel down each groove of the frame, artwork facing out, and seat them fully. Don't force them.

  5. Light it up

    Put a battery-powered LED light inside, set the roof back on and slide it to lock.

These panels fit the Modular Lantern Frame, sold on its own or with the panels. Battery LED lights only: no candles, flames or hot bulbs.

05Selling your prints

Every download comes with a license that lets you sell the physical prints you make. The full terms are in LICENSE.txt inside the ZIP.

You can

  • Print it for yourself, family and friends, and as gifts
  • Sell physical prints, with no quantity limit or royalty
  • Change the files for your own printing, and sell prints of those too
  • Use your own photos of your prints to sell them

You can't

  • Share, upload, sell or give away the files, or remixes of them
  • Pass the files on with a print you sell
  • Claim the design as yours, or imply 3MF Labs endorses your shop

Want a friend to have the files? Send them this page. Read the full license

Thanksgiving

More Thanksgiving designs

See them all
Eight 3D-printed fall earring charms on a warm wooden table: two yellow sunflowers with brown seed centers, two red toadstool mushrooms with ivory spots, two pumpkin spice latte cups with orange sleeves and two brown owls with caramel bellies, beside gold ear wires and jump rings, mini pumpkins, cinnamon sticks, fallen leaves and a knit scarf. $3.79 3ML-078 · Earring collection

Fall Earrings

Four pairs of fall earrings: sunflowers, toadstool mushrooms, pumpkin spice lattes and owls. STL + 3MF · 1.4 MB View model A 3D-printed turkey fidget spinner in pumpkin orange lying on a wooden table: eight rounded tail feathers around a round cap with a turkey face, near small pumpkins, autumn leaves and a lit candle. $2.49 3ML-071 · Fidget spinner

Turkey Fidget Spinner

Eight tail feathers spin around a turkey-face hub. It prints in place in one piece: no metal bearing, no assembly. STL + 3MF · 5.6 MB View model A 3D-printed maple leaf fidget spinner in pumpkin orange lying on a wooden table: three leaves with engraved veins around a round crosshatched cap, near fallen maple leaves, acorns, a mustard knit scarf and a mug of cider. $2.49 3ML-072 · Fidget spinner

Autumn Leaf Fidget Spinner

Three maple leaves spin around an acorn-cap hub. It prints in place in one piece: no metal bearing, no assembly. STL + 3MF · 9.6 MB View model Eight 3D-printed Thanksgiving earring charms on a walnut table: two turkeys, two pumpkin pie slices, two red maple leaves and two acorns, beside gold ear wires and jump rings, pumpkins and a candle. $3.79 3ML-015 · Earring collection

Thanksgiving Earrings

Four pairs of Thanksgiving earrings: turkeys, pumpkin pie slices, maple leaves and acorns. STL + 3MF · 5.0 MB View model A 3D-printed cornucopia candy bowl in caramel with a brown rope rim, filled with wrapped caramels and foil chocolates on a rustic wooden table, with a printed cluster of pumpkins, an apple and wheat hooked over the rim. $3.79 3ML-017 · Candy bowl

Cornucopia Candy Bowl

A woven-look cornucopia horn that holds wrapped candy, with a curled tail and a harvest cluster that hooks over the rim. STL + 3MF · 12 MB View model