A 3D-printed heart-shaped tray puzzle on a wooden table: nine chunky jigsaw pieces in red, pink and white fill a white heart tray, with pink tulips and a gift bag behind.
Heart Puzzle Nine pieces,
one heart.
Fits one way A message hides underneath
The empty 3D-printed white heart tray with LOVE YOU and a small heart in red letters on its floor.
Hidden messageLOVE YOU shows when the pieces come out
The 3D-printed heart puzzle closed: a flat white heart lid with a raised red heart outline sits flush in the tray, on pink linen.
ClosedThe lid sits flush, ready to give
Nine loose 3D-printed jigsaw pieces with big round knobs, three red, three pink and three white, on a wooden table.
The piecesNine chunky pieces, 4 mm thick

Print facts

Size
130 x 120 mm
Prints
3, flat
Print time
2 h 37 min
Filament
85 g
Supports
None
Set up for
P2S

01About

A Valentine's Day gift you print, close and hand over. Nine chunky jigsaw pieces in red, pink and white fill a shallow heart tray, and a flat lid with a raised heart closes it.

Take the pieces out and a hidden message shows on the tray floor: LOVE YOU, with a small heart, in red on white.

The tray is 130 mm wide and 120 mm tall, about the size of an open hand, and only 8 mm high. The pieces are 4 mm thick with big round knobs, and they only fit one way: every knob is different, so no two pieces can swap places.

Three flat prints with nothing to glue or put together with tools. The tray and the lid are two colors with one color change each, by height, so they need no AMS. The nine pieces in three colors need an AMS; without one, print them in one color, or print the plate once in each color and mix the pieces, which makes three puzzles. The 3MF projects are set up for a Bambu Lab P2S, and the STLs print on any printer. No supports. The license lets you sell the puzzles you make.

  • Hidden LOVE YOU under the pieces
  • Nine chunky pieces that fit one way
  • A lid that closes it for gifting
  • Three flat prints, no supports
  • No glue, nothing to assemble
  • Sell the puzzles you make
  • Valentine's Day
  • Puzzle
  • Hidden message
  • Gift
  • No supports
  1. Open the 3MF in Bambu Studio

    Open it as a project (File, then Open Project). The printer, plate and settings are already saved, so there's nothing to set up. Printing on another brand? Use the STL files with the settings below.

  2. Load your filament

    You need three colors:

    • Tray wall and floor, lid, three piecesWhite
    • Message, tray underside, lid heart, three piecesRed
    • Three piecesPink
  3. Print

    Print everything on the list below, then put it together.

The readout is the whole set in one color per print: tray about 52 min and 30 g, lid 45 min and 25 g, pieces 1 h and 29 g. The tray and lid in two colors take a minute or two longer and need no AMS: one color change each, with the AMS or with a pause and a swap by hand (tray: start red, change to white at layer 5, 0.8 mm; lid: start white, change to red at layer 11, 2.0 mm). The pieces in three colors need an AMS and take about 2 h 18 min and 43 g with 40 color changes: keep the prime tower. Without an AMS, print the pieces' STL in one color, or once in each color. Print all three files at 100%, or scale all three by the same amount (not below 90%): scaling one alone changes the fit. A first layer squashed too hard makes the pieces tight.

Printing on another printer or slicer? See the settings

The 3MF projects have these settings saved for a Bambu Lab P2S. Using the STLs on another printer? These are the settings they were made with.

Printer
Bambu Lab P2S, 0.4 mm nozzle, textured PEI plate
Material
PLA in white, red and pink
Layer height
0.20 mm, first layer 0.20 mm
Walls
2
Infill
15%
Orientation
All flat as supplied: tray open side up, lid heart side up
Supports
None
Brim
None

03What to print

3 prints. Print all three, once each:

PartHow manyColor
The heart tray with the hidden message, 130 x 120 x 8.3 mmTray1×Red, then white
The flat heart lid with a raised heart outline, 125.5 x 115.5 x 2.8 mmLid1×White, then red
All nine puzzle pieces on one plate, 4 mm thick, 33 to 60 mm acrossPieces1×Three colors (AMS)

Each print comes as a 3MF project and as an STL: use one or the other, not both.

04Putting it together

  1. Print all three

    Print the tray, the lid and the pieces flat, as supplied, with no supports. Let each cool on the plate, then rub a fingernail round the bottom edge of every piece.

  2. Lay the pieces in

    Fit the nine pieces into the tray. They only go together one way: every knob is different.

  3. Close the lid

    Set the lid on top, heart side up, and press gently all round until it sits level with the top of the tray. Four small bumps hold it in.

  4. Open it

    Put a fingernail under the lid at the scoop in the wall, on the lower right of the heart, and lift. Tip the pieces out to find the message.

The full notes are in START_HERE.txt inside the download. If the lid is tight, press it in and take it out a few times and the bumps bed in. Small parts: not for children under 3.

05Selling your prints

Every download comes with a license that lets you sell the physical prints you make. The full terms are in LICENSE.txt inside the ZIP.

You can

  • Print it for yourself, family and friends, and as gifts
  • Sell physical prints, with no quantity limit or royalty
  • Change the files for your own printing, and sell prints of those too
  • Use your own photos of your prints to sell them

You can't

  • Share, upload, sell or give away the files, or remixes of them
  • Pass the files on with a print you sell
  • Claim the design as yours, or imply 3MF Labs endorses your shop

Want a friend to have the files? Send them this page. Read the full license

What buyers say

Hundreds of sales so far, and buyers keep leaving 5-star reviews.

  • Perfect all around. Great designs, great price, can't say enough. Do recommend and will buy more!

    High Temp Arts, Holiday earrings
  • Customer service is outstanding! Went above and beyond expectations along with the files I purchased.

    Etsy buyer
  • Super cute files and easy to use!

    Etsy buyer, Christmas ornaments

Read every review on Etsy

A 3D-printed heart-shaped tray puzzle on a wooden table: nine chunky jigsaw pieces in red, pink and white fill a white heart tray, with pink tulips and a gift bag behind.

97 new designs in the last 30 days

Get the Heart Puzzle free.

Join the membership and this design is yours today, with every new design we release while you're a member. Every file comes with the license to sell your prints.

Cancel any time. What you download stays yours. See what members get