A 3D-printed Valentine garland of eight red hearts with white designs spelling LOVE, strung on jute twine across a white mantel with pink tulips, candles and envelopes behind.
Valentine Heart Garland Eight hearts.
One word.
Threads on ribbon Raised letters
The eight red hearts laid out on a whitewashed wooden table: scalloped, heart outline, polka dots, arrow, and the letters L, O, V and E in white, with jute twine and scissors behind.
All eightEight hearts, about 60 mm each
The eight hearts strung on a pink satin ribbon tied in bows, hanging on a white wall above a small wooden table and spelling LOVE.
On ribbonStrung on a pink ribbon
Four freshly printed red hearts on a dark print bed: a scalloped heart with a white wavy border, a heart outline, white polka dots and a white arrow.
The patternsFour pattern hearts on one plate

Print facts

Hearts
8
Size
60 x 55 mm
Per plate
About 50 min
Plates
2 of 4
Supports
No
Colors
2, one swap

01About

Eight hearts in one download that thread onto twine or ribbon for a Valentine garland. Four carry the letters L, O, V and E, and four carry patterns: a scalloped heart with a wavy white border, a heart inside a heart, polka dots and an arrow. They are red with raised white designs.

Each heart is about 60 x 55 mm and 3.6 mm thick: a 2.4 mm red base with a 1.2 mm raised design. Two 4.5 mm holes near the top take twine, yarn or ribbon up to 3 mm wide. About 1.5 m threads all eight, with ends left over to tie loops for hanging.

No AMS needed: the color changes only by height, so one filament swap gives every heart its white design. With an AMS, the 3MF projects do it for you. In one color, the letters and patterns still stand out in relief.

The hearts print flat in two plates of four with no supports: about 50 minutes and 23 g per plate. Print a plate again for a longer strand. It comes as 3MF projects set up for a Bambu Lab P2S and as STL, and the license lets you sell the garlands you make.

  • Eight hearts, LOVE in the middle
  • Threads onto twine or ribbon up to 3 mm
  • Two colors with one swap, no AMS needed
  • Flat prints, no supports or glue
  • Repeat a plate for a longer strand
  • Sell the garlands you make
  • Valentine's
  • Garland
  • Hearts
  • LOVE
  • Home decor
  • No supports
  1. Open the 3MF in Bambu Studio

    Open it as a project (File, then Open Project). The printer, plate and settings are already saved, so there's nothing to set up. Printing on another brand? Use the STL files with the settings below.

  2. Load your filament

    You need two colors:

    • Heart base (to 2.4 mm)Red
    • Letters and patterns (2.4 to 3.6 mm)White
  3. Print

    Print both plates flat, design up, with no supports. The hearts come off the plate finished: nothing to glue.

The color changes only by height. Without an AMS, add one pause or filament change before layer 13 and swap to white. Pink with white makes a softer pair, or try white hearts with red designs.

Printing on another printer or slicer? See the settings

Each 3MF project has these settings saved for a Bambu Lab P2S. Using the STLs on another printer? These are the settings they were made with.

Printer
Bambu Lab P2S, 0.4 mm nozzle, textured PEI plate
Material
PLA
Layer height
0.20 mm, first layer 0.20 mm
Supports
Off
Brim
Off
Orientation
Flat, design up

03What to print

8 hearts. Two plates of four hearts:

PartHow manyColor
Heart-Garland-Designs01 Heart-Garland-Designs4 heartsScalloped, heart outline, polka dots, arrow
LOVE-Hearts02 LOVE-Hearts4 heartsThe letters L, O, V and E

Each plate comes as one 3MF (full color) and one STL (one color) with the same name. Pick one format for each print. Print a plate again for a longer garland.

04Making your garland

  1. Let them cool

    Let the plate cool fully before lifting the hearts, so they stay flat.

  2. Thread them

    With the designs facing you, push the twine or ribbon through the left hole from the back, then back through the right hole. Put L O V E in order in the middle.

  3. Hang it

    Space the hearts evenly, leave enough at each end to tie a loop, and hang it on a mantel, shelf or wall.

Twine, yarn or ribbon up to 3 mm wide is not included (about 1.5 m for eight hearts). Display indoors, away from direct sun and heaters. With its cord, the garland is not a toy for small children.

05Selling your prints

Every download comes with a license that lets you sell the physical prints you make. The full terms are in LICENSE.txt inside the ZIP.

You can

  • Print it for yourself, family and friends, and as gifts
  • Sell physical prints, with no quantity limit or royalty
  • Change the files for your own printing, and sell prints of those too
  • Use your own photos of your prints to sell them

You can't

  • Share, upload, sell or give away the files, or remixes of them
  • Pass the files on with a print you sell
  • Claim the design as yours, or imply 3MF Labs endorses your shop

Want a friend to have the files? Send them this page. Read the full license

What buyers say

Hundreds of sales so far, and buyers keep leaving 5-star reviews.

  • Perfect all around. Great designs, great price, can't say enough. Do recommend and will buy more!

    High Temp Arts, Holiday earrings
  • Customer service is outstanding! Went above and beyond expectations along with the files I purchased.

    Etsy buyer
  • Super cute files and easy to use!

    Etsy buyer, Christmas ornaments

Read every review on Etsy

Valentine's Day

More Valentine's Day designs

See them all
A 3D-printed Valentine garland of eight red hearts with white designs spelling LOVE, strung on jute twine across a white mantel with pink tulips, candles and envelopes behind.

97 new designs in the last 30 days

Get the Valentine Heart Garland free.

Join the membership and this design is yours today, with every new design we release while you're a member. Every file comes with the license to sell your prints.

Cancel any time. What you download stays yours. See what members get