Eight 3D-printed Valentine earring charms on a pale wood board: two pink candy hearts saying XO and LUV, two red lips, two white love letters with red heart seals and two red hearts on gold arrows, beside gold ear wires and jump rings, rose petals, a kraft envelope tied with red twine and a jar of pink candies.
Valentine Earrings Print tonight.
Wear your heart.
A loop for the ear wire Colors in layers
Two 3D-printed red heart earrings on gold arrows hanging from gold ear wires on a plain kraft earring card on a wooden table.
In useHeart and arrow pair, ready to wear
Two 3D-printed pink candy heart earring charms with white rims and raised red letters, XO and LUV, lying on a cream linen napkin.
Close-upThe candy heart pair
Two 3D-printed white envelope earring charms with a pink flap line and a red heart seal lying on pink craft paper.
Close-upThe love letter pair

Print facts

Pairs
4
Print time
1 h 18 min
Filament
22 g
Colors
4
Supports
None
Set up for
P2S + AMS

01About

Four pairs of Valentine earrings in one download: pink candy hearts with a white rim, one saying XO and one saying LUV in raised red letters; red lips with a white shine mark; white love letters with a pink flap line and a red heart seal; and red hearts on a gold arrow.

Every charm is about 2.4 mm thick, 26 to 33 mm wide and about 24 mm tall, with a flat back and a sturdy round loop with a 2 mm hole for a jump ring and an ear wire; the hardware isn't included. They print flat with no supports.

The colors are stacked by height, two or three per pair, so they print with an AMS or with a pause and a filament swap between the layers. Any pair also prints in one color from its STL: every detail is raised or grooved, so it still reads well.

Each pair comes as a Bambu Studio project for a P2S and as STL, plus all four pairs on one plate (for a four-color AMS). The license lets you sell the earrings you make.

  • Four pairs: candy hearts, lips, love letters, heart and arrow
  • The candy hearts are a mixed pair: XO and LUV
  • Layered colors you can see and feel
  • Every charm with a 2 mm hole for a jump ring
  • Prints flat with no supports
  • Sell the earrings you make
  • Valentine's
  • Earrings
  • Prints flat
  • No supports
  1. Open the 3MF in Bambu Studio

    Open it as a project (File, then Open Project). The printer, plate and settings are already saved, so there's nothing to set up. Printing on another brand? Use the STL files with the settings below.

  2. Load your filament

    You need four colors:

    • Lips, hearts, letters, heart sealsRed
    • Candy heart faces, flap linesPink
    • Envelopes, candy heart rims, shine marksWhite
    • ArrowsGold
  3. Print

    Print everything on the list below, then put it together.

The colors change only between layers: print a pair with an AMS, or with pauses and filament swaps (the guide lists the layers). All four pairs on one plate needs a four-color AMS. Without an AMS, any pair's STL prints in one color. Any gold, yellow-gold or silk gold PLA works for the arrows. Keep the scale at 100% so the 2 mm holes fit the hardware. Print time and filament are for all four pairs on one plate in full color; in one color the plate takes about 23 minutes and 7 g.

Printing on another printer or slicer? See the settings

Each 3MF project has these settings saved for a Bambu Lab P2S. Using the STLs on another printer? These are the settings they were made with.

Printer
Bambu Lab P2S, 0.4 mm nozzle, textured PEI plate
Material
PLA
Layer height
0.20 mm, first layer 0.20 mm, no adaptive layers
Walls
3
Infill
100%
Supports
Off
Brim
None
Orientation
Flat, decorative face up

03What to print

8 charms in 4 pairs. The whole collection:

PartHow manyColor
Candy heart earrings: XO and LUVCandy-Heart-Pair1 pairWhite, pink, red
Lips earringsLips-Pair1 pairRed and white
Love letter earringsLove-Letter-Pair1 pairWhite, pink, red
Heart and arrow earringsHeart-Arrow-Pair1 pairGold, red, white
All eight charms on one plateOptionalAll-Four-Pairs4 pairsRed, pink, white, gold

Each file prints a pair, or all four pairs at once. Use its 3MF or its STL, not both.

04Putting it together

  1. Pick a file per pair

    Open a pair's 3MF as a project, set up for a Bambu Lab P2S, or use its STL in any slicer, not both. Or print all four pairs on one plate.

  2. Print them flat

    Decorative face up, no supports, no brim. With an AMS the colors print by themselves; without one, pause between the color layers and swap filament, or print a pair in one color.

  3. Clean the loops

    Let the charms cool before lifting them by the broad body, then remove any strings and check each 2 mm hole. Never pull on the arrow ends.

  4. Add the hardware

    Pass a jump ring through the charm and the ear wire's loop and close it. Hinged click jump rings about 6 mm across, with wire up to 0.8 mm, need no tools. Ear wires and jump rings aren't included.

  5. Wear them

    Each charm hangs face forward from its loop: XO on one ear, LUV on the other. No glue anywhere.

Keep finished earrings away from heat that could soften the plastic, keep small parts away from young children, and check each pair before wearing or selling it.

05Selling your prints

Every download comes with a license that lets you sell the physical prints you make. The full terms are in LICENSE.txt inside the ZIP.

You can

  • Print it for yourself, family and friends, and as gifts
  • Sell physical prints, with no quantity limit or royalty
  • Change the files for your own printing, and sell prints of those too
  • Use your own photos of your prints to sell them

You can't

  • Share, upload, sell or give away the files, or remixes of them
  • Pass the files on with a print you sell
  • Claim the design as yours, or imply 3MF Labs endorses your shop

Want a friend to have the files? Send them this page. Read the full license

What buyers say

Hundreds of sales so far, and buyers keep leaving 5-star reviews.

  • Perfect all around. Great designs, great price, can't say enough. Do recommend and will buy more!

    High Temp Arts, Holiday earrings
  • Customer service is outstanding! Went above and beyond expectations along with the files I purchased.

    Etsy buyer
  • Super cute files and easy to use!

    Etsy buyer, Christmas ornaments

Read every review on Etsy

Valentine's Day

More Valentine's Day designs

See them all
Eight 3D-printed Valentine earring charms on a pale wood board: two pink candy hearts saying XO and LUV, two red lips, two white love letters with red heart seals and two red hearts on gold arrows, beside gold ear wires and jump rings, rose petals, a kraft envelope tied with red twine and a jar of pink candies.

97 new designs in the last 30 days

Get the Valentine Earrings free.

Join the membership and this design is yours today, with every new design we release while you're a member. Every file comes with the license to sell your prints.

Cancel any time. What you download stays yours. See what members get