Four pairs.
Print facts
- Pairs
- 4
- Parts
- 8 charms
- Thickness
- 2.4 mm
- Colors
- 4
- Supports
- None
- Set up for
- P2S + AMS
01About
Four pairs of Hanukkah earrings in one download: a gold menorah with nine ivory candles and small yellow flames, the center candle taller; a royal blue dreidel with an ivory panel and a gold Star of David; a royal blue Star of David with an ivory outline; and a gold gelt coin with a raised rim and a royal blue star. There is no lettering on any of them.
Every charm is 2.4 mm thick and about 26 to 30 mm tall, with a flat back and a sturdy round loop with a 2 mm hole for a connector ring and an ear wire; the hardware isn't included. They print flat with no supports.
Every pair has two or three colors, so the full-color projects need an AMS. Without one, any pair prints in one color from its STL, or in color from its STL with a filament change or two at the layers the guide lists.
Each pair, and all four together, comes as a Bambu Studio project for a P2S and as STL. The license lets you sell the earrings you make.
- Four pairs: menorah, dreidel, Star of David, gelt
- The menorah has all nine candles
- Layered colors you can see and feel
- Every charm 2.4 mm thick, with a 2 mm hole for a connector ring
- Prints flat with no supports
- Sell the earrings you make
02How to print
Open the 3MF in Bambu Studio
Open it as a project (File, then Open Project). The printer, plate and settings are already saved, so there's nothing to set up. Printing on another brand? Use the STL files with the settings below.
Load your filament
You need four colors:
- Dreidels, stars, gelt starsRoyal Blue
- Candles, dreidel panels, star outlinesIvory White
- Menorahs, gelt, dreidel starsSilk Gold
- FlamesYellow
Print
Print everything on the list below, then put it together.
The all-four-pairs project needs an AMS with four colors; each single pair uses two or three. Without an AMS, print any layout's STL in one color, or use the filament-change layers the guide lists for a single pair. Silk Gold means gold-colored PLA, not metal filament, and any royal blue PLA works. Keep the scale at 100% so the 2 mm holes fit the hardware.
Printing on another printer or slicer? See the settings
Each 3MF project has these settings saved for a Bambu Lab P2S. Using the STLs on another printer? These are the settings they were made with.
- Printer
- Bambu Lab P2S, 0.4 mm nozzle, textured PEI plate
- Material
- PLA
- Layer height
- 0.20 mm, first layer 0.20 mm, no adaptive layers
- Walls
- 3
- Infill
- 100%
- Supports
- Off
- Brim
- None
- Orientation
- Flat, decorative face up
03What to print
8 charms in 4 pairs. All-Four-Pairs, the whole collection on one plate:
| Part | How many | Color |
|---|---|---|
| Menorah earrings, nine candlesMenorah-Pair | 1 pair | Gold, ivory, yellow |
| Dreidel earringsDreidel-Pair | 1 pair | Royal blue, ivory, gold |
| Star of David earringsStar-Pair | 1 pair | Royal blue, ivory |
| Gelt coin earringsGelt-Pair | 1 pair | Gold, royal blue |
Print All-Four-Pairs once, or any single pair on its own. Use its 3MF or its STL, not both.
04Putting it together
Pick your layout
All four pairs on one plate, or one pair at a time. Open the 3MF as a project, set up for a Bambu Lab P2S, or use its STL in any slicer, not both.
Print them flat
Decorative face up, no supports, no brim. The full-color projects need an AMS; without one, print in one color.
Clean the loops
Let the charms cool before lifting them by the broad body, then remove any strings and check each 2 mm hole. Don't pull on the candles.
Add the hardware
Pass a connector ring through the charm and the ear wire's loop and close it. Finger-opening hinged connectors about 6 mm across, with wire up to 0.8 mm, need no tools. Ear wires and connectors aren't included.
Wear them
Each charm hangs face forward from its loop. No glue anywhere.
Keep finished earrings away from heat that could soften the plastic, keep small parts away from young children, and check each pair before wearing or selling it.
05Selling your prints
Every download comes with a license that lets you sell the physical prints you make. The full terms are in LICENSE.txt inside the ZIP.
You can
- Print it for yourself, family and friends, and as gifts
- Sell physical prints, with no quantity limit or royalty
- Change the files for your own printing, and sell prints of those too
- Use your own photos of your prints to sell them
You can't
- Share, upload, sell or give away the files, or remixes of them
- Pass the files on with a print you sell
- Claim the design as yours, or imply 3MF Labs endorses your shop
Want a friend to have the files? Send them this page. Read the full license
$2.49
3ML-096 · Hair clip
Bow Hair Clip
A printed snap hair clip with a puffy bow on top, in two sizes: a flexing tongue clicks under a little catch, with no metal clip, pin or glue. STL + 3MF · 2.1 MB View model
$3.79
3ML-068 · Flexi octopus
Articulated Octopus
A smiling coral octopus with eight chunky tentacles that wiggle side to side and curl at the tips. It prints in one piece, already joined, so there's nothing to put together. STL + 3MF · 5.2 MB View model
$3.79
3ML-064 · Flexi cat
Articulated Cat
A happy orange tabby that wiggles from its shoulders to the tip of its tail. It prints in one piece, already joined, so there's nothing to put together. STL + 3MF · 4.5 MB View model
$3.79
3ML-066 · Flexi dragon
Articulated Crystal Dragon
A gem-cut dragon that wiggles from its neck to the tip of its tail, with two wings you click on and lift to flap. The body prints in one piece, already joined. STL + 3MF · 1.4 MB View model
$3.79
3ML-062 · Slider fidget
Rocket Launch Slider
A starry night-sky keychain with a little rocket that slides up beside its launch tower and clicks into three stops. STL + 3MF · 155 KB View model
$3.79
3ML-063 · Flexi snake
Articulated Rattlesnake
A friendly cartoon rattlesnake that wiggles from head to rattle. It prints in one piece, already joined, so there's nothing to put together. STL + 3MF · 4.6 MB View model
Free
3ML-041 · Costume headband