A 3D-printed snowball maker with white scissor arms and two icy blue cups with snowflake holes, lying open on a snowy wooden table beside a round snowball and a snowy evergreen branch with red berries.
Snowball Maker Scoop. Squeeze.
Perfect snowballs.
Prints in one piece
The snowball maker closed in a snowy backyard, its two blue cups meeting around a snowball, with three finished round snowballs in a row beside it.
In the snowClosed around a snowball
A close view of the two icy blue cups opened a little on a snowy wooden table, light shining through the snowflake-shaped drain holes.
Drain holesSnowflake holes in both cups
The snowball maker seen from above on a pale wooden table beside a red knitted mitten and a round snowball, the cups open.
Real sizeLonger than a mitten

Print facts

Full color
5 h 23 min
One color
3 h 54 min
Filament
101-113 g
Colors
1 or 2
Assembly
None
Set up for
P2S, PLA

01About

Scissor-style snowball tongs about 228 mm (9 in) long. Two white arms cross at one round pivot, with a finger loop on each, and two icy blue cups at the front close together into one round 60 mm (2.4 in) snowball. Six snowflake-shaped holes in each cup let melt water drain out.

Scoop loose, packable snow, squeeze gently until the cup rims meet, then open to let a round snowball out. The rims are the stop, so it never squeezes too far.

It prints in place lying flat, the pivot already joined, so there's nothing to put together and no screws or glue. Supports go only under and inside the cups; the pivot needs none. It fits a 256 x 256 mm plate.

The full-color project (white and icy blue) changes color within layers, so it needs an AMS: about 5 h 23 min and 113 g including supports and color-change waste. Without an AMS, print the STL in one color: about 3 h 54 min and 101 g. It comes as a Bambu Studio project for a P2S and as STL. The license lets you sell the snowball makers you make.

  • Makes round 60 mm (2.4 in) snowballs
  • Prints in place: nothing to assemble, no glue
  • Snowflake holes drain melt water
  • Full color with an AMS, or one color
  • About 228 mm (9 in) long, fits a 256 mm plate
  • Sell the prints you make
  • Christmas
  • Winter
  • Snowball
  • Kids
  1. Open the 3MF in Bambu Studio

    Open it as a project (File, then Open Project). The printer, plate and settings are already saved, so there's nothing to set up. Printing on another brand? Use the STL files with the settings below.

  2. Load your filament

    You need two colors:

    • Arms, finger loops and pivotWhite
    • CupsIcy light blue
  3. Print

    Print it lying flat at 100% scale with the supports under the cups. It comes off the plate in one piece, the pivot already joined.

The colors change within layers, so the full-color 3MF needs an AMS: keep its prime tower. Without an AMS, print the STL in one color and block supports over both arms, the grips and the pivot. Keep the scale at 100% (shrinking it closes up the pivot) and keep both arms together where they are.

Printing on another printer or slicer? See the settings

The 3MF project has these settings saved for a Bambu Lab P2S. Using the STL on another printer? These are the settings it was made with.

Printer
Bambu Lab P2S, 0.4 mm nozzle, textured PEI plate
Material
Regular PLA (or PETG with a PETG profile: it stays tougher in the cold)
Layer height
0.20 mm, first layer 0.20 mm
Walls
4, with 5 top and 5 bottom layers
Infill
20% gyroid
Supports
Normal automatic supports, 30° threshold, only under and inside the cups. Never inside the pivot: the 3MF has this painted in
Brim
None
Orientation
As supplied: lying flat, almost closed, both arms on the bed

03What to print

1 snowball maker. One snowball maker per print:

PartHow manyColor
Full color needs an AMSSnowball-Maker1 snowball makerWhite and icy light blue

Pick one format, the 3MF for full color or the STL for one color, not both.

04Getting it moving

  1. Print it

    Print the 3MF or the STL once, lying flat as supplied and at 100% scale.

  2. Let it cool

    Let the plate cool, then lift the whole tool off, supporting both arms.

  3. Remove the supports

    Peel the supports from under the cups, then open the arms just enough to clear the supports inside each cup and from the snowflake holes.

  4. Free the pivot

    Hold close to the pivot and gently rock the arms until they swivel freely. Don't pry at the cap or pull the arms apart. Check that the cup rims meet evenly.

Use it on soft, packable snow and close gently until the rims meet: don't squeeze past them or crush ice, and don't dig with it. Keep fingers clear of the crossing arms and cup rims; children should use it with an adult nearby. It is not for throwing. PLA can crack if dropped on ice, so stop using any cracked part. Rinse with cool water and keep it away from heat.

05Selling your prints

Every download comes with a license that lets you sell the physical prints you make. The full terms are in LICENSE.txt inside the ZIP.

You can

  • Print it for yourself, family and friends, and as gifts
  • Sell physical prints, with no quantity limit or royalty
  • Change the files for your own printing, and sell prints of those too
  • Use your own photos of your prints to sell them

You can't

  • Share, upload, sell or give away the files, or remixes of them
  • Pass the files on with a print you sell
  • Claim the design as yours, or imply 3MF Labs endorses your shop

Want a friend to have the files? Send them this page. Read the full license

What buyers say

Hundreds of sales so far, and buyers keep leaving 5-star reviews.

  • Perfect all around. Great designs, great price, can't say enough. Do recommend and will buy more!

    High Temp Arts, Holiday earrings
  • Customer service is outstanding! Went above and beyond expectations along with the files I purchased.

    Etsy buyer
  • Super cute files and easy to use!

    Etsy buyer, Christmas ornaments

Read every review on Etsy

Christmas

More Christmas designs

See them all
Four 3D-printed snowflake coasters on a pale wooden table: three icy blue coasters with white snowflakes in front, a glass mug of hot cocoa with marshmallows on the middle one, and the blue holder with the rest stacked inside, beside a cream knit throw, frosted pine and candles. $3.79 3ML-149 · Coaster set

Snowflake Coaster Set

Six icy blue drink coasters, each with a different white snowflake, and an open-front holder that stacks all six. Winter decor that stays out after Christmas. STL + 3MF · 6.2 MB View model
A 3D-printed red and white candy-cane ladder for a Christmas elf doll, two sections clipped together with two red hooks at the top, lying on a wooden table with fir branches and red baubles behind. $2.49 3ML-148 · Elf prop

Elf Climbing Ladder

A candy-cane climbing ladder for your Christmas elf. The sections clip together end to end, as long as you like, and two hooks hang it from a tree branch, a garland, a shelf or a curtain rod. STL + 3MF · 7.0 MB View model
Three white 3D-printed water-drop globes in three sizes with a raised snowy village of houses, pine trees and a church, glowing warm over LED tealights with bright cut-out windows and stars. $3.79 3ML-143 · Tealight holders

Winter Village Glow Globes

Three white globes with a snowy village raised all the way around. Each one sits over a battery LED tealight: the thin wall glows, the village shows as a silhouette, and the windows and stars shine brightest. STL + 3MF · 11 MB View model
A 3D-printed stand-up Christmas sign that says I'M BACK in green and red raised letters, with a snow cap, a red elf hat, candy canes and holly, standing on two posts in a white snowy base on a mantel. $3.79 3ML-144 · Elf props

I'm Back Elf Sign

A chunky stand-up I'M BACK sign for the morning your Christmas elf returns: raised letters, snow on top, a jingle-bell elf hat, candy canes and holly, on two posts in a snowy base. STL + 3MF · 5.8 MB View model
A 3D-printed miniature porch set on an oak floor in front of a white baseboard: a white window with green shutters and a red holly flower box, a white picket fence with a small open gate, a red welcome mat, a green bench, a little Christmas tree in a red pot and a stack of three presents. $3.79 3ML-140 · Elf props

Elf Door Porch Set

Seven little pieces that turn an elf door into a front porch: a window with shutters and holly, a picket fence with a gate that opens, a bench, a welcome mat, a Christmas tree and a stack of presents. STL + 3MF · 12 MB View model
Three 3D-printed cone Christmas trees with a knitted-wool look in red, cream and sage green, each with cable bands, a ribbed hem and a pom-pom on top, glowing through small gaps over LED tealights on a wooden mantel. $3.79 3ML-141 · Tealight holders

Knit Christmas Tree Tealights

Three cone Christmas trees that look like chunky hand-knitted wool, with a ribbed hem, cable bands and a pom-pom on top. Each one sits over a battery LED tealight and glows through small gaps in the knitting. STL + 3MF · 34 MB View model
A 3D-printed miniature red elevator front with a NORTH POLE EXPRESS sign, a floor dial with a red pointer and two white sliding doors parted in the middle, standing against a white baseboard on an oak floor with a Christmas tree glowing in the background. $3.79 3ML-142 · Elf props

Elf Elevator Door

A little North Pole elevator for the baseboard: two doors that slide open, a floor pointer that turns and clicks, and a NORTH POLE EXPRESS sign, printed in one piece. STL + 3MF · 6.2 MB View model
Six white 3D-printed Christmas ornaments with raised black coloring lines on a wooden craft table: Santa, a snowman, a reindeer, a gingerbread man, a tree and a stocking, with a jar of markers, red ribbon, pine and fairy lights. $3.79 3ML-137 · Kids craft ornaments

Color-In Christmas Ornaments

Six Christmas ornaments kids color in themselves, like coloring book pages you can hang: Santa, a snowman, a reindeer, a gingerbread man, a tree and a stocking. Raised lines keep the marker inside. STL + 3MF · 5.0 MB View model
A 3D-printed miniature gingerbread elf door with a peppermint window, white icing, candy cane posts and gumdrops standing slightly open against a white baseboard, with a tiny gingerbread mailbox and a lollipop lamp post beside it and a Christmas tree in the background. $3.79 3ML-138 · Elf door

Gingerbread Elf Door

A little gingerbread house door that really opens, with a peppermint window, icing, candy cane posts and gumdrops, plus a mailbox and a lollipop lamp post for the doorstep. STL + 3MF · 12 MB View model
A 3D-printed green tabletop Christmas tree in a white snow base, decorated with colorful pop-in charms and a big yellow star, on a wooden table with fairy lights behind. $3.79 3ML-131 · Tabletop decor

Interchangeable Christmas Tree

A chunky tabletop Christmas tree you decorate again and again: 24 pop-in charms and a big star push into round sockets on the front. STL + 3MF · 11 MB View model
A 3D-printed Santa paper towel holder on a kitchen counter: a white roll of paper towels on a red post and round white base, with a small Santa head in a red hat on top, a red mug and a lit Christmas tree behind. $3.79 3ML-133 · Kitchen decor

Santa Paper Towel Holder

A standing paper towel holder that turns the roll into Santa: the roll is his body and his head sits on top. STL + 3MF · 4.8 MB View model
A 3D-printed pretend Christmas cookie set on a kitchen table: a grey baking tray with six caramel cookies wearing icing tops, spare icing tops, a spatula and a rolling pin, with fairy lights behind. $5.99 3ML-129 · Pretend play set

Christmas Cookie Play Set

A pretend Christmas baking set: a baking tray, six chunky play cookies with icing tops that press on and swap, a spatula and a rolling pin. STL + 3MF · 3.4 MB View model
A felt Christmas elf doll with a green cap, red arms and red-and-white striped legs wearing a 3D-printed white Christmas tree snack cake costume, sitting on a wooden shelf with its curled green shoes dangling, fairy lights behind. $3.79 3ML-130 · Elf doll costume

Tree Cake Elf Costume

A Christmas tree snack cake costume for a 12-inch elf doll: the face peeks out of the front, the arms out of the sides and the legs out of the bottom. STL + 3MF · 4.2 MB View model
Four 3D-printed Christmas name ornaments on a wooden table, a stocking with EMMA, a mitten with NOAH, a gift tag with OLIVIA and a gingerbread house with LUCAS, with twine loops, pine, kraft-paper gifts and fairy lights. $3.79 3ML-128 · Personalized ornaments

Christmas Name Ornaments

Four personalized Christmas ornaments: a stocking, a mitten, a gift tag and a gingerbread house. Type any name in Bambu Studio and it prints on the ornament, no design skills needed. STL + 3MF · 4.2 MB View model
A 3D-printed dark green Advent tray on a wooden table with four cream cups holding battery LED tealights, the first two glowing, gold numbers 1 to 4 in front of the cups and holly leaves and red berries along the back, with pine and warm lights behind. $3.79 3ML-124 · Advent tealight tray

Advent Wreath Tealight Tray

A modern Advent wreath for the table or windowsill: one green tray with four cream cups for battery LED tealights, gold numbers 1 to 4 and a holly garland along the back. STL + 3MF · 11 MB View model
Three 3D-printed Christmas tealight holders on a wooden mantel, each with a glowing battery LED tealight: a red Santa suit pot with a white rim, black belt and gold buckle, a white snowman pot with a red scarf and black buttons, and a brown gingerbread pot with white icing, pine and warm lights behind. $3.79 3ML-125 · Tealight holders

Santa Suit Tealight Holders

Three chubby little pots for battery LED tealights, each in its own Christmas outfit: a Santa suit with a belt and gold buckle, a snowman with a red scarf and a gingerbread cookie with wavy icing. STL + 3MF · 12 MB View model
A 3D-printed hot cocoa bar set on a wooden kitchen counter: a red tray with three cream and red cups holding mini marshmallows, candy canes and wooden stir sticks, a chocolate brown HOT COCOA BAR sign with a cocoa mug on top standing behind them, and a brown scoop in front, pine and warm lights behind. $3.79 3ML-126 · Hot cocoa station

Hot Cocoa Bar Set

A little hot cocoa station for the kitchen counter: a red tray with three cups for marshmallows, candy canes and stir sticks, a HOT COCOA BAR sign that drops into the back of the tray, and a scoop. STL + 3MF · 17 MB View model
A 3D-printed green Christmas-tree tray on a wooden table, decorated with fifteen round bauble counters in red, orange, purple, blue and pink and a yellow star with a white 6 at the top, with spare counters, an evergreen sprig and fairy lights behind. $3.79 3ML-119 · Counting game

Christmas Tree Decorating Game

A Christmas tree to decorate: a green tree tray, 25 colorful bauble counters and 15 numbered stars. Pick a star, put it on top, then hang that many baubles on the tree. STL + 3MF · 5.4 MB View model
A 3D-printed snowball launcher on a wooden table: a red seesaw arm with a round pad and a cup on a white snow base, eight white snowballs in front and three snowmen with black top hats behind, with Christmas lights glowing in the background. $3.79 3ML-120 · Tabletop game

Snowball Launcher

A tabletop snowball fight: a red seesaw launcher on a white snow base, eight snowballs and three snowmen to knock down. Load the cup, tap the pad, watch it fly. STL + 3MF · 7.1 MB View model
Twelve 3D-printed gold ornament hooks in two rows on a wooden table, each with a colored star, snowflake, holly, bell, Christmas tree or peppermint in the middle, with red and gold baubles and pine behind them. $2.49 3ML-121 · Ornament hooks

Christmas Ornament Hooks

Twelve flat ornament hooks in six festive designs: a gold S-hook that slips over a branch, a little star, snowflake, holly, bell, tree or peppermint in the middle, and a small hook for the bauble's loop. STL + 3MF · 1.3 MB View model
A 3D-printed snowman on a wooden shelf in a red beanie with a white pompom and a red scarf, with stubby white arms, coal buttons and a carrot nose, red baubles and pine beside it and warm lights behind. $3.79 3ML-122 · Flexi snowman

Christmas Flexi Snowman

A chubby snowman in a red beanie and scarf whose head and middle twist round. It prints standing up in one go, already joined. STL + 3MF · 10 MB View model
A 3D-printed Santa face door hanger lying on a wooden table, with a red hat, white brim and beard and the words SANTA STOP HERE! in red, with cookies, a glass of milk and pine behind it. $2.49 3ML-123 · Door hanger

Santa Door Hanger

A smiling Santa for the bedroom doorknob: red hat, puffy white brim, rosy cheeks and a big white beard that says SANTA STOP HERE! in bold red letters. STL + 3MF · 1.5 MB View model
A 3D-printed white ten-frame tray on a wooden table with a dark green number 7 in its left bay and seven Christmas-light-bulb counters, five red and two green, in the cells, with spare bulbs, a fir sprig and fairy lights behind. $3.79 3ML-117 · Counting set

Christmas Lights Ten Frame

A Christmas ten frame for little counters: a white tray, twenty red and green light-bulb counters and chunky numbers from 0 to 10. Pick a number, count the bulbs in. STL + 3MF · 10 MB View model
A 3D-printed flexi penguin lying on its belly on a snowy white windowsill, in a red Santa hat with a white pompom and a red knit scarf, with a frosty window, a fir sprig with red berries and warm lights behind. $3.79 3ML-118 · Flexi penguin

Christmas Flexi Penguin

A chubby penguin sliding on its belly in a Santa hat and a knit scarf. The head turns and the body wiggles, and it prints in one piece, already joined. STL + 3MF · 5.7 MB View model
A 3D-printed caramel brown flexi reindeer with cream antlers, black eyes and a red nose standing on a light wooden table beside a fir sprig, red and gold baubles, fake snow and warm string lights. $3.79 3ML-113 · Flexi reindeer

Articulated Reindeer

A chubby red-nosed reindeer whose head turns and whose body wiggles side to side. It prints in one piece, already joined, so there's nothing to put together. STL + 3MF · 8.7 MB View model
A 3D-printed white low-poly snowman in a black top hat with two brown fists giving the middle finger, standing on a light wooden table with red and silver baubles, pine and warm string lights blurred behind. $3.79 3ML-114 · Gag figurine

Cheeky Snowman

A faceted low-poly snowman in a black top hat, with two brown arms that curve up into little fists giving everyone the middle finger. The Cheeky Christmas Tree has company. STL + 3MF · 3.9 MB View model
A 3D-printed melted snowman on a wooden table: a white slush puddle with a tipped black top hat with a red band, an orange carrot nose, coal eyes and buttons, twig arms and a red knit scarf, with fairy lights, holly and a mug of cocoa behind. $2.49 3ML-116 · Tabletop decoration

Melted Snowman

A snowman who stayed out in the sun too long: a soft slush puddle with his tipped top hat, carrot nose, coal and knitted scarf left behind. It prints in one piece, so there's nothing to put together. STL + 3MF · 4.4 MB View model
A 3D-printed Christmas tree fidget spinner in green lying on a wooden table: six stepped Christmas trees around a round cap with a red star, near a pine sprig, red and gold baubles, red ribbon and fairy lights. $2.49 3ML-112 · Fidget spinner

Christmas Tree Fidget Spinner

Six chunky Christmas trees spin around a star-topped hub. It prints in place in one piece: no metal bearing, no assembly. STL + 3MF · 5.3 MB View model
A 3D-printed red sled with caramel slats, a pair of red skis with white stripes and two white poles with snowflake baskets on a wooden tabletop dusted with snow, Christmas lights and garland behind. $3.79 3ML-107 · Elf props

Elf Ski and Sled Set

Winter gear for your Christmas elf: red skis with toe arches, two poles with snowflake baskets, and a little sled with curled runners. STL + 3MF · 13 MB View model
A 3D-printed red Santa Cam in a Santa hat beside three small signs on boots reading Caution Elf at Work, Nice List in Progress and Elf Crossing, on a wooden shelf with Christmas lights behind. $3.79 3ML-108 · Elf props

Elf Prop Signs and Santa Cam

Daily scenes for your Christmas elf: a red Santa Cam in a Santa hat, plus three little signs on boots: Caution Elf at Work, Nice List in Progress and Elf Crossing. STL + 3MF · 8.5 MB View model
A 3D-printed white snowman shelf sitter with a black top hat, red scarf, carrot nose and brown forked twig arms, sitting on a wooden mantel with its jointed white legs and black boots dangling over the edge, with a fir garland, red and silver baubles and warm string lights behind. $3.79 3ML-109 · Shelf sitter

Snowman Shelf Sitter

A chubby snowman that sits on the edge of your shelf: top hat, red scarf, carrot nose, forked twig arms that click in, and jointed legs dangling over the edge in black boots. STL + 3MF · 17 MB View model
A 3D-printed closed curb chain in white with red undersides, laid out as a rounded square on a light wooden table, with a red locking clasp at the bottom and a Christmas tree shaped case with red icing stripes and green sprinkles hanging from it, a fir garland, baubles and warm string lights along the top edge. $3.79 3ML-110 · Joke necklace

Christmas Tree Cake Hype Chain

A thick, flat curb chain, white over red, made to wear our Christmas Tree Cake Case as a giant pendant. It prints as one closed ring with every link already joined. STL + 3MF · 28 MB View model
A large 3D-printed Christmas tree advent calendar on a wooden floor beside a tree: a dark green stepped cabinet with 24 red and ivory drawers numbered 1 to 24 in gold, three of them pulled open, a gold star on top and a wide green stand. $5.99 3ML-111 · Advent calendar

Large Advent Calendar

A big Christmas tree advent calendar with 24 roomy pull-out drawers numbered 1 to 24 in gold, red and ivory, built from four sections that slide together on a wide stand. STL + 3MF · 10 MB View model
A 3D-printed elf furniture set on a wooden table by a Christmas tree: a caramel bed with a star headboard, green blanket and red pillow, a red armchair with a white cushion, and a round side table. $3.79 3ML-104 · Elf furniture

Elf Furniture Set

A little bedroom for your Christmas elf: a bed with a star headboard and bedding that lifts out, a red armchair with a white cushion, and a round side table. STL + 3MF · 12 MB View model
Eight 3D-printed ugly Christmas sweater earring charms on a pale wood table: two red with a snowflake, two green with a reindeer, two red with a Christmas tree and two dark green with a snowman, beside silver ear wires and rings, a mug of cocoa, a red knit sweater and pine sprigs. $3.79 3ML-105 · Earring collection

Ugly Sweater Earrings

Four pairs of ugly Christmas sweater earrings: a snowflake, a reindeer, a Christmas tree and a snowman. STL + 3MF · 6.4 MB View model
A 3D-printed red North Pole mailbox on a wooden mantel with its door open, a gold flag, a candy-striped post on a snow mound and three white envelopes with red hearts, Christmas lights behind. $3.79 3ML-106 · Elf mailbox

Elf North Pole Mailbox

A chubby red mailbox for your Christmas elf: a door that opens and clicks shut, a gold flag that swings, a candy-striped post, and three little envelopes. STL + 3MF · 13 MB View model
A 3D-printed caramel elf arrival crate with a closed hinged lid marked FRAGILE, a round loop through the lid and a North Pole Special Delivery sign on the front, on a wooden floor by a Christmas tree with wrapped presents. $3.79 3ML-103 · Elf crate

Elf Arrival Crate

A little North Pole shipping crate for your Christmas elf to arrive in. Print it with a lid that opens on a hinge printed already assembled, or with a separate lid that lifts straight off. Both have a round loop for a key ring or mini lock, and a Special Delivery sign. STL + 3MF · 16 MB View model
A 3D-printed red vintage pickup truck on a warm wooden table, with black wheels and a dark green Christmas tree leaning back in its bed, near wrapped presents, pine sprigs with red berries and glowing fairy lights. $3.79 3ML-101 · Rolling truck

Christmas Tree Truck

A chunky red vintage pickup bringing home its Christmas tree. The black wheels click on and really roll, and the green tree leans back in the bed and lifts out, with no glue or tools. STL + 3MF · 7.4 MB View model
A 3D-printed Santa magic key with a green wreath, gold star and candy-cane shaft beside a red and ivory tag reading SANTA'S MAGIC KEY, on a pale wooden porch board with fir sprigs, a pine cone, a brass bell and red ribbon. $2.49 3ML-100 · Santa key

Santa Magic Key

A Santa magic key for homes without a chimney: a green wreath with a gold star, a candy-cane shaft and a matching SANTA'S MAGIC KEY tag. STL + 3MF · 2.4 MB View model
A small 3D-printed ice blue flexi shark keychain with a white belly and a big toothy grin, wearing a red Santa hat with a white band, lying on a light wooden table with a silver split key ring through the hole in its dorsal fin, beside a fir sprig, red and silver baubles, fake snow and warm string lights. $2.49 3ML-091 · Flexi keychain

Christmas Flexi Shark Keychain

Our grinning Christmas flexi shark shrunk to keychain size: 8.5 cm long, a Santa hat, four sections that wiggle side to side and a keyring hole in its dorsal fin. STL + 3MF · 14 MB View model
Eight 3D-printed Christmas treat earring charms on a light wooden table: two white tree snack cakes with red zigzag icing and green sprinkles, two caramel star cookies with white icing, two white peppermint candies with red swirls and two caramel donuts with white icing and sprinkles, beside silver ear wires and jump rings, a plate of frosted cookies and a mug of hot cocoa. $3.79 3ML-092 · Earring collection

Christmas Treats Earrings

Four pairs of Christmas treat earrings: tree snack cakes, frosted star cookies, peppermints and sprinkle donuts. STL + 3MF · 4.6 MB View model
Three 3D-printed white Christmas tree shaped cases on a wooden table: the middle one face up with red icing stripes and green sprinkles across the front, the left one face down showing two belt loop straps on its back, the right one face down showing a slide-in belt clip on its back, with a brown leather belt, a fir garland, red and gold baubles and warm string lights behind. $2.49 3ML-093 · Belt case

Christmas Tree Cake Belt Case

A case that looks just like a Christmas tree snack cake and rides on your belt: belt loops or a slide-on clip, snap shut or hinge and clasp, in two sizes. STL + 3MF · 16 MB View model
Four 3D-printed Christmas coasters on an oak table: a green snowflake coaster, a white tree coaster, a green ornament coaster and a red gingerbread coaster under a mug of hot cocoa, with the dark green holder behind and string lights, pine and red baubles in the background. $3.79 3ML-094 · Coaster set

Christmas Coasters

Four festive drink coasters, a snowflake, a Christmas tree, a gingerbread man and an ornament, with an open-front holder they stack in. STL + 3MF · 2.5 MB View model
A 3D-printed white Christmas tree snack cake shelf sitter with red icing stripes and green sprinkles, flat mitten hands resting on a light wooden shelf and two jointed white legs in round boots dangling over the edge, with a fir garland, red and gold baubles and warm string lights behind. $3.79 3ML-086 · Shelf sitter

Tree Cake Shelf Sitter

A Christmas tree snack cake that sits on the edge of your shelf: white icing, red stripes, green sprinkles, mitten hands out to the sides and jointed legs dangling over the edge. STL + 3MF · 5.1 MB View model
A 3D-printed ice blue flexi shark with a white belly and a big toothy grin, wearing a red Santa hat with a white band and pom-pom, lying on a light wooden table beside a fir sprig, red and silver baubles, fake snow and warm string lights. $3.79 3ML-088 · Flexi shark

Christmas Flexi Shark

A toothy cartoon shark in a Santa hat that wiggles side to side. It prints in one piece, already joined, so there's nothing to put together. STL + 3MF · 33 MB View model
A 3D-printed Christmas wreath fidget spinner in green with red berries lying on a wooden table: a ring of holly leaves with eight red berry clusters around a round cap with a red bow, near a holly sprig, red and gold baubles, red ribbon and fairy lights. $2.49 3ML-079 · Fidget spinner

Christmas Wreath Fidget Spinner

A green holly wreath with red berries spins around a bow-topped hub. It prints in place in one piece: no metal bearing, no assembly. STL + 3MF · 7.3 MB View model
A 3D-printed red Christmas ornament shelf sitter on a dark wooden mantel: a round red bulb with a gold cap and hanging loop, thin arms ending in flat mitten hands resting on the mantel, and two jointed red legs in gold boots hanging over the edge, with a fir garland, warm string lights and red and gold baubles behind. $3.79 3ML-080 · Shelf sitter

Ornament Shelf Sitter

A round Christmas ornament that sits on the edge of your shelf, mitten hands out to the sides and jointed legs swinging over the edge. STL + 3MF · 5.3 MB View model
A 3D-printed green low-poly Christmas tree with three star-edged tiers and two cartoon fists on the front giving the middle finger, standing on a light wooden table with a white satin ribbon, red and gold baubles and warm string lights blurred behind. $3.79 3ML-084 · Gag figurine

Cheeky Christmas Tree

A faceted low-poly Christmas tree with two little fists giving everyone the middle finger. Festive, with attitude. STL + 3MF · 4.2 MB View model
A 3D-printed white Christmas tree shaped case with red icing stripes and green sprinkles across the front, a small hinge on the left edge, with a silver split key ring through the loop at its top, standing on a light wooden table, with a fir garland, red and gold baubles and warm string lights blurred behind. $2.49 3ML-085 · Keychain case

Christmas Tree Cake Case

A hinged keychain case that looks just like a Christmas tree snack cake: white icing, red stripes, green sprinkles, and room for a real one inside. STL + 3MF · 2.1 MB View model
A 3D-printed Christmas ornament fidget spinner in red with gold trim lying on a wooden table: three red baubles with gold stripes, dots and a zigzag around a round cap with a gold star, near glass Christmas baubles, pine, gold ribbon and fairy lights. $2.49 3ML-074 · Fidget spinner

Christmas Ornament Fidget Spinner

Three red Christmas baubles with gold trim spin around a star-topped hub. It prints in place in one piece: no metal bearing, no assembly. STL + 3MF · 3.9 MB View model
Eight 3D-printed Christmas earring charms on a walnut board: two nutcracker soldiers, two red Christmas light bulbs with gold caps, two green wrapped presents with red bows and two reindeer heads, beside gold ear wires and jump rings, fir sprigs, baubles, a pine cone and a candle. $3.79 3ML-075 · Earring collection

Nutcracker Christmas Earrings

Four pairs of Christmas earrings: nutcrackers, Christmas light bulbs, wrapped presents and reindeer. STL + 3MF · 896 KB View model
Eight 3D-printed winter earring charms on white boards: two ice skates, two red hot cocoa mugs, two penguins in red scarves and two cardinals on snowy pine facing each other, beside silver ear wires and jump rings, a knit scarf, a mug of cocoa, a pine cone and a red mitten. $3.79 3ML-076 · Earring collection

Winter Earrings

Four pairs of winter earrings: penguins, cardinals, ice skates and mugs of hot cocoa. STL + 3MF · 979 KB View model
Eight 3D-printed New Year's earring charms on a black slate board: gold 20 and 27 numbers on black outlines, two silver disco balls with gold caps, two pairs of gold champagne flutes with ivory bubbles and two gold clocks at a minute to midnight, beside gold ear wires and jump rings, confetti, ribbon curls, a glass of champagne and a disco ball. $3.79 3ML-077 · Earring collection

New Year's Earrings

Four pairs of New Year's Eve earrings: 2027, disco balls, champagne flutes and clocks at midnight. STL + 3MF · 6.1 MB View model
A 3D-printed gingerbread fidget spinner in caramel with white icing lying on a wooden table: six smiling gingerbread cookies in a ring around a round iced cap with a heart, near a plate of gingerbread cookies, a candy cane, pine with red berries and fairy lights. $2.49 3ML-073 · Fidget spinner

Gingerbread Fidget Spinner

Six smiling gingerbread cookies spin around an iced-cookie hub. It prints in place in one piece: no metal bearing, no assembly. STL + 3MF · 10 MB View model
A 3D-printed snowflake fidget spinner in icy white lying on a light wooden table: six branched arms around a round centre cap, near a mug of hot cocoa, pine sprigs and warm fairy lights. $2.49 3ML-067 · Fidget spinner

Snowflake Fidget Spinner

A six-armed snowflake that spins around its centre hub. It prints in place in one piece: no metal bearing, no assembly. STL + 3MF · 8.2 MB View model
A 3D-printed Christmas train on a warm wooden table: a red steam locomotive with a flared chimney and spoked wheels, a dark green open wagon with a raised holly leaf on its side, and a red caboose with a cupola, near wrapped presents, pine sprigs with red berries and glowing fairy lights. $3.79 3ML-069 · Rolling train

Christmas Train

A chunky Christmas steam train in three pieces: a red locomotive, a green candy wagon and a red caboose. The wheels click on and really roll, and the cars link together with no glue or tools. STL + 3MF · 19 MB View model
Four 3D-printed Christmas spinning tops on a light oak side table: a green tree with a yellow star, a snowman on a snow mound, an icy blue snowflake disc and a red and gold ornament. $2.49 3ML-061 · Spinning tops

Christmas Spinning Tops

Four Christmas finger tops: a tree with a star, a snowman, a snowflake disc and an ornament that flips over onto its cap. STL + 3MF · 11 MB View model
A 3D-printed Christmas tic-tac-toe game: a dark green wreath board with red holly berries and a red bow around a white disc with a gold grid, green tree pieces and red ornament pieces, on a wooden table with pine cones and string lights. $3.79 3ML-053 · Board game

Christmas Tic-Tac-Toe

Tic-tac-toe on a sculpted Christmas wreath: a snowy board with a gold grid, five little trees against five red ornaments. STL + 3MF · 6.5 MB View model
A 3D-printed red gift box with an ivory ribbon cross and a puffy ivory bow on a wooden table, with fir sprigs, pine cones, white envelopes, a mug of cocoa and a lit Christmas tree behind. $3.79 3ML-054 · Puzzle box

Secret Puzzle Gift Box

A red Christmas present with an ivory bow that hides a gift card or folded cash, and only opens if you know the secret. STL + 3MF · 14 MB View model
A 3D-printed silhouette nativity set on a rustic wooden table by evergreen branches and warm fairy lights: ivory flat figures of the stable with a gold star, Mary, Joseph, the manger, an angel, a shepherd, a sheep, a donkey, a camel and three wise men, each in a dark green oval base. $5.99 3ML-049 · Nativity set

Silhouette Nativity Set

A tabletop nativity in bold silhouettes: the stable with a gold star, the holy family, the angel, a shepherd, animals and the three wise men, each standing in its own green base. STL + 3MF · 1.7 MB View model
A 3D-printed miniature elf door with a wreath and round window standing slightly open against a white baseboard, warm light glowing behind it, with a tiny mailbox, ladder and gold lantern post, little presents and fake snow, and a Christmas tree in the background. $3.79 3ML-043 · Elf door

Elf Door Set

A little arched Christmas door with a wreath and a round window that really opens, plus a mailbox, a ladder and a lantern for the doorstep. STL + 3MF · 4.2 MB View model
Four 3D-printed photo frame ornaments with family photos in their round windows: a red bauble and a green tree hanging on red ribbons from a Christmas tree, a gold star and an ivory snowflake lying on a cream knit blanket beside a spool of red ribbon, warm string lights behind. $3.79 3ML-044 · Photo ornaments

Photo Frame Ornaments

Four Christmas ornaments, a bauble, a star, a tree and a snowflake, each with a round window for a favorite photo and a banner for a name or year. STL + 3MF · 5.8 MB View model
Four white 3D-printed light clips on a snowy wooden porch rail at dusk: a J-shaped gutter hook holding a green Christmas light wire in its small round channel, a long all-in-one clip with a socket ring, an arched railing clamp and a flat shingle tab, with a lit window and warm string lights blurred behind. $2.49 3ML-045 · Light clips

Christmas Light Clips

Four one-piece clips for hanging outdoor string lights on gutters, shingles and round porch rails, with no nails, screws or tools. STL + 3MF · 6.2 MB View model
Four 3D-printed lithophane ornament frames with glowing winter-scene lithophanes: a red star standing in an ivory glow stand on a wooden table, and a gold bauble, an ivory snowflake and a green tree hanging on red ribbons from a lit Christmas tree, a fireplace glowing behind. $3.79 3ML-046 · Lithophane frames

Lithophane Ornament Frames

Four Christmas ornament frames, a bauble, a star, a tree and a snowflake, that hold your own round lithophane, plus a glow stand that lights it from behind. STL + 3MF · 10.0 MB View model
A 3D-printed penguin clicker standing on a snowy wooden table at Christmas: a black egg-shaped body with an ivory belly and face, an orange beak and feet, a red knit beanie with an ivory cuff and a small ivory pompom button on top, and a silver key ring through the loop on its hat, with fir sprigs, a wrapped present, a pine cone and a candle behind. $3.79 3ML-034 · Fidget clicker

Penguin Clicker

A chubby Christmas penguin in a red knit beanie whose little ivory pompom is a button that clicks and springs back, on a keyring loop. STL + 3MF · 5.9 MB View model
A 3D-printed snowman clicker standing on a snowy wooden table at Christmas: two ivory snowballs with coal eyes, smile and buttons, an orange carrot nose, a red knit scarf, a black top hat with a red band and a small black button on top, and a silver key ring through the loop on the brim, with fir sprigs, a wrapped present, a pine cone and a candle behind. $3.79 3ML-036 · Fidget clicker

Snowman Clicker

A chubby Christmas snowman in a red knit scarf whose little top hat has a button that clicks and springs back, on a keyring loop. STL + 3MF · 5.9 MB View model
A 3D-printed gold star tree topper on top of a decorated Christmas tree: a faceted five-point star with raised ridges on every arm, on a smooth gold cone over the top branch, with string lights and gold and red baubles below. $3.79 3ML-037 · Tree topper

Star Tree Topper

A classic faceted gold star for the top of the tree, with raised ridges on the front and back and a hollow base that slides over the top branch. STL + 3MF · 125 KB View model
A 3D-printed red gift card box shaped like a wrapped present, with a white ribbon and a white bow on the lid, on a dark wooden table with pine sprigs, red berries, a tealight and warm string lights. $3.79 3ML-038 · Gift card box

Gift Card Present Box

A little wrapped present with a white ribbon and a chunky bow. Lift the hinged lid and the gift card lies flat in its own pocket. STL + 3MF · 347 KB View model
A 3D-printed dark green Christmas tree marble run with a gold star on top, glass marbles rolling down its spiral track and two resting in a red tray at its foot, on a wooden table with a lit Christmas tree, presents and a mug of cocoa behind. $5.99 3ML-040 · Marble run

Christmas Tree Marble Run

Drop a marble in by the star and watch it roll three and a half turns around the tree into a red present tray. STL + 3MF · 22 MB View model
Six 3D-printed Christmas character ornaments lying on a dark wooden table: a reindeer, a penguin in a red scarf, a red cardinal on holly, a nutcracker, a gnome and a polar bear in a striped scarf, with fir sprigs, pine cones, a mug of cocoa, a candle and red ribbon around them. $3.79 3ML-030 · Ornament set

Christmas Character Ornaments

Six flat layered character tree ornaments with bold black outlines: a reindeer, a penguin, a cardinal on holly, a nutcracker, a gnome and a polar bear in a scarf. STL + 3MF · 8.2 MB View model
A 3D-printed gingerbread house glowing on a snowy wooden mantel: caramel walls with wavy icing, lit windows, a candy-cane door arch and a white snow roof with red peppermints, green gumdrops and a chimney, a Christmas tree behind. $3.79 3ML-031 · Tealight house

Gingerbread Tealight House

A big gingerbread house that glows: icing trim, a candy-cane door, and a snowy lift-off roof with peppermints and gumdrops over a battery LED tealight. STL + 3MF · 3.0 MB View model
A 3D-printed red Santa sleigh candy dish with an ivory snowy rim, raised swirls and curled gold runners, filled with peppermints and foil-wrapped chocolates on a snowy wooden mantel, a Christmas tree glowing behind. $3.79 3ML-032 · Candy dish

Santa Sleigh Candy Dish

Santa's sleigh as a candy dish: a deep red tub with raised swirls, a snowy ivory rim and curled gold runners, printed in one piece. STL + 3MF · 5.1 MB View model
Four red 3D-printed Christmas cookie cutters and their matching stamps, a gingerbread man, a tree, a snowflake and a mitten, on a floured wooden board beside rolled dough and freshly stamped cookies, Christmas lights glowing behind. $3.79 3ML-033 · Cookie cutters

Christmas Cookie Cutters

Four Christmas cookie cutters, each with a matching stamp that presses in the details: gingerbread man, Christmas tree, snowflake and mitten. STL + 3MF · 2.5 MB View model
Two 3D-printed Chattering Nutcracker keychains on a dark wooden table by walnuts and a fir sprig, one with its chin shut and one with its chin swung open, a Christmas tree glowing behind. $3.79 3ML-026 · Fidget keychain

Chattering Nutcracker

A nutcracker soldier keychain whose chin swings open and clacks shut: tall black hat with a red plume, curled white hair, a big black mustache and a little white beard. STL + 3MF · 12 MB View model
Eight 3D-printed Christmas earring charms on a walnut board: two gingerbread men, two candy canes with green bows, two red snowflake discs and two Christmas trees, beside gold ear wires and jump rings, fir sprigs, baubles, a pine cone and a candle. $3.79 3ML-028 · Earring collection

Christmas Earrings

Four pairs of Christmas earrings: gingerbread men, candy canes, snowflakes and Christmas trees. STL + 3MF · 4.0 MB View model
Six 3D-printed peppermint Christmas ornaments lying on a dark wooden table: a round red and ivory swirl, a wrapped peppermint, a candy cane with green holly, a star, a heart and a striped bell with a green bow, with peppermint candies, a mug of cocoa, fir sprigs, candles and red and white twine around them. $3.79 3ML-029 · Ornament set

Peppermint Candy Ornaments

Six flat layered peppermint tree ornaments with bold black outlines: a round swirl, a wrapped candy, a candy cane with holly, a star, a heart and a striped bell with a bow. STL + 3MF · 8.6 MB View model
Four 3D-printed Christmas village houses glowing on a snowy wooden mantel: a red cottage with a chimney, an ivory church with a steeple and cross, a green shop with a big window and a caramel gingerbread house with icing, each with a white snow roof, a Christmas tree behind. $3.79 3ML-025 · Tealight houses

Village Tealight Houses

Four snowy little village houses that glow: a red cottage, an ivory church, a green shop and a gingerbread house, each with a lift-off snow roof over a battery LED tealight. STL + 3MF · 14 MB View model
A 3D-printed angel tree topper on top of a decorated Christmas tree: an ivory cone robe, a gold bob and halo, a gold star held in her hands and spread silver feathered wings, with string lights and gold and red baubles behind. $3.79 3ML-023 · Tree topper

Angel Tree Topper

A smiling angel for the top of the tree: an ivory robe that slides over the top branch, a gold bob and halo, a gold star in her hands and silver feathered wings that fold flat for storage. STL + 3MF · 2.2 MB View model
A 3D-printed Christmas tree advent calendar on a wooden sideboard: a dark green stepped tree cabinet with 24 red and ivory drawers numbered 1 to 24 in gold, two of them pulled open with a foil-wrapped chocolate inside, a gold star on top and a green stand, with fir sprigs, pine cones, baubles and a candle around it. $5.99 3ML-024 · Advent calendar

Advent Calendar

A Christmas tree advent calendar with 24 pull-out drawers numbered 1 to 24 in gold, red and ivory like a checkerboard, a gold star on top and a stand it snaps into. STL + 3MF · 9.2 MB View model
A 3D-printed gnome clicker standing on a wooden table at Christmas: a caramel body, a long wavy ivory beard, a round nose and a tall red cone hat with a push button on the tip and a silver key ring through its loop, with a wrapped present, fir sprigs and a candle behind. $3.79 3ML-019 · Fidget clicker

Gnome Clicker

A tall Christmas gnome with a long ivory beard and a red cone hat whose tip is a button that clicks and springs back, on a keyring loop. STL + 3MF · 4.5 MB View model
A 3D-printed Santa chimney slider keychain lying on a wooden table at Christmas: red bricks with ivory mortar, an ivory snow cap reading HO HO HO, a silver key ring through its loop and a little Santa in the slot down the middle, with a wrapped present, fir sprigs and a candle behind. $3.79 3ML-020 · Slider fidget

Santa Chimney Slider

A snowy brick chimney keychain with a little Santa who slides down the middle and clicks into three stops. STL + 3MF · 217 KB View model
Six 3D-printed Christmas ornaments lying on a dark wooden table: an ivory snowflake, a snowman with a red scarf, a red and ivory candy cane, a gingerbread man, a green tree with a yellow star and a blank red and ivory name banner, with a wrapped present, fir sprigs, a pine cone and a candle behind. $3.79 3ML-021 · Ornament set

Christmas Ornament Set

Six flat layered tree ornaments with bold black outlines: a snowflake, a snowman, a candy cane, a gingerbread man, a Christmas tree and a blank name banner you personalize. STL + 3MF · 8.7 MB View model
Christmas Four-in-a-Row on a wooden table: one game open mid-play with red ornament and ivory snowflake counters in the green grid and a gold bow on its corner, and a second folded shut into a green present with a gold ribbon and bow, with fir sprigs, pine cones, red baubles and candles around. $5.99 3ML-022 · Folding board game

Christmas Four-in-a-Row

A folding four-in-a-row game: 21 ornaments, 21 snowflakes, and a case that closes into a wrapped Christmas present. STL + 3MF · 1.2 MB View model
Two 3D-printed ornament bulb clickers on a dark wooden table at Christmas, one red and one dark green, both with raised gold curls and a gold push-button cap, a silver key ring through the green one's loop, with wrapped presents, fir sprigs and a candle behind. $3.79 3ML-018 · Fidget clicker

Ornament Bulb Clicker

A round Christmas ornament with raised gold curls and a gold cap button that clicks and springs back, on a keyring loop. STL + 3MF · 5.9 MB View model
Four 3D-printed Christmas stocking holders on a wooden mantel: a nutcracker on a red base, a snowman on a white base, a green Christmas tree and a gingerbread house, each with a hook holding a knitted stocking. $5.99 3ML-016 · Mantel decor

Christmas Stocking Holders

Four weighted stocking holders for the mantel: a nutcracker soldier, a snowman, a Christmas tree and a gingerbread house. STL + 3MF · 9.2 MB View model
The Peppermint Snake on a wooden table at Christmas: a 3D-printed snake of red-and-white peppermint candies with black eyes and a red forked tongue, curving past candy canes and a mug of hot cocoa, with a lit Christmas tree behind. $3.79 3ML-013 · Flexi snake

Peppermint Snake

A wiggly snake made of peppermint candies, with black eyes and a red tongue. It prints in one piece, already joined, so there's nothing to put together. STL + 3MF · 23 MB View model
The Silent Night Lantern Panels glowing in a black 3D-printed lantern on a snowy windowsill: Santa's sleigh crossing a full moon, and a snowman in falling snow. $3.79 3ML-007 · Lantern panels

Silent Night Lantern Panels

Four light-up Christmas scenes for our Modular Lantern: Santa's sleigh across the moon, a snowman, a snowy village and a Christmas tree. STL + 3MF · 4.0 MB View model
The Candy Cane Lane Lantern Panels glowing in an ivory 3D-printed lantern on a kitchen counter: a gingerbread house and crossed candy canes, with cookies and candy canes behind. $3.79 3ML-008 · Lantern panels

Candy Cane Lane Lantern Panels

Four light-up candy scenes for our Modular Lantern: a gingerbread house, candy canes and peppermints, gingerbread friends and a candy-cane lamppost. STL + 3MF · 11 MB View model
The Holy Night Lantern Panels glowing in a gold 3D-printed lantern by a starry window: the nativity under a star and the three wise men on camels. $3.79 3ML-009 · Lantern panels

Holy Night Lantern Panels

Four light-up nativity scenes for our Modular Lantern: the nativity under the star, the three wise men, the angel and the shepherds. STL + 3MF · 8.7 MB View model
The Nutcracker Suite Lantern Panels glowing in a green 3D-printed lantern on a decorated mantel: a nutcracker beside a Christmas tree, and a ballerina among snowflakes. $3.79 3ML-010 · Lantern panels

Nutcracker Suite Lantern Panels

Four light-up scenes from the Nutcracker for our Modular Lantern: the nutcracker by the tree, a ballerina, the Mouse King and marching toy soldiers. STL + 3MF · 11 MB View model
The North Pole Lantern Panels glowing in a red 3D-printed lantern under a Christmas tree: Santa's workshop and his sleigh with reindeer, among wrapped presents. $3.79 3ML-011 · Lantern panels

North Pole Lantern Panels

Four light-up North Pole scenes for our Modular Lantern: Santa's workshop, his sleigh and reindeer, Santa at the chimney, and a pile of toys. STL + 3MF · 9.0 MB View model
A 3D-printed snowball maker with white scissor arms and two icy blue cups with snowflake holes, lying open on a snowy wooden table beside a round snowball and a snowy evergreen branch with red berries.

97 new designs in the last 30 days

Get the Snowball Maker free.

Join the membership and this design is yours today, with every new design we release while you're a member. Every file comes with the license to sell your prints.

Cancel any time. What you download stays yours. See what members get