coffee on.
Print facts
- Pods
- 12 a drawer
- Drawer
- 179 x 234 mm
- Print time
- 13 h 32 min
- Filament
- 527 g
- Supports
- None
- Set up for
- P2S
01About
Tidy the coffee corner. Each module is a housing and a pull-out drawer that holds 12 single-serve coffee pods upright in a 3 x 4 grid of round seats. Print as many pairs as you like and stack them: four locating lugs on top of each housing fit the sockets under the next.
The drawer slides out about 150 mm and a flexible tab cut into its side stops it there, so it does not fall out; a firm straight pull removes it for refilling. The matching loose tray holds 12 more pods in a kitchen drawer or on the counter.
The housing is 186 x 240 x 62 mm, the drawer 179 x 234 x 51 mm and the tray 176 x 232 x 15 mm. The seats fit standard single-serve pods about 51 mm across and 45 mm tall: check your pods before printing.
Everything prints in one color with no supports, no glue and no screws. The 3MF projects are set up for a Bambu Lab P2S, and the STLs print on any printer with a 240 mm tall build. The license lets you sell the organizers you make.
- Holds 12 pods per drawer
- Stack as many as you like
- Drawer stop built in
- Loose 12-pod tray too
- No supports, no glue
- Sell the prints you make
02How to print
Open the 3MF in Bambu Studio
Open it as a project (File, then Open Project). The printer, plate and settings are already saved, so there's nothing to set up. Printing on another brand? Use the STL files with the settings below.
Load your filament
One color:
- EverythingWarm white
Print
Print everything on the list below, then put it together.
Keep the scale at 100% and the supplied orientations. Times are for one housing and one drawer (housing 7 h 42 min / 317 g, drawer 5 h 49 min / 211 g); the tray is 4 h 29 min / 146 g.
Printing on another printer or slicer? See the settings
The 3MF projects have these settings saved for a Bambu Lab P2S. Using the STLs on another printer? These are the settings they were made with.
- Printer
- Bambu Lab P2S, 0.4 mm nozzle, textured PEI plate
- Material
- PLA, one color
- Layer height
- 0.20 mm, first layer 0.20 mm
- Walls
- 3, with 5 top and 4 bottom layers
- Infill
- 12% gyroid
- Orientation
- Housing on its closed back, opening up (240 mm tall); drawer and tray flat, seats up
- Supports
- None
- Brim
- 3 mm outer brim
03What to print
3 parts. One housing and one drawer per module; print as many modules as you like. The tray is optional:
| Part | How many | Color |
|---|---|---|
| The box the drawer slides into, with stacking lugs on topCoffee-Pod-Drawer-Housing | 1× | Warm white |
| Pull-out drawer with 12 pod seats and a built-in stopCoffee-Pod-Drawer-Drawer | 1× | Warm white |
| Optional loose tray with 12 pod seatsCoffee-Pod-Drawer-Tray | 1× | Warm white |
Each file comes as a 3MF project and as an STL: use one or the other, not both.
04Putting it together
Let it cool
Let the prints cool fully, then peel away the brim and any loose strings.
Slide in the drawer
Set the housing on its bottom, lugs on top, and slide the empty drawer in with the finger notch facing you. The flexible tab in its left wall clicks past the stop.
Fill it
Stand one pod in each seat, lid up. Pull the notch to open; the drawer stops about 150 mm out. To take it out, empty it and pull straight and firmly past the stop.
Stack more
Lower another housing's four bottom sockets onto the lugs. Lift modules apart straight up, keep stacks low and open one drawer at a time.
The full notes, including fit tips, are in START_HERE.txt inside the download. Keep PLA away from hot appliances, hot water, direct sun and dishwashers; wipe clean with a damp cloth.
05Selling your prints
Every download comes with a license that lets you sell the physical prints you make. The full terms are in LICENSE.txt inside the ZIP.
You can
- Print it for yourself, family and friends, and as gifts
- Sell physical prints, with no quantity limit or royalty
- Change the files for your own printing, and sell prints of those too
- Use your own photos of your prints to sell them
You can't
- Share, upload, sell or give away the files, or remixes of them
- Pass the files on with a print you sell
- Claim the design as yours, or imply 3MF Labs endorses your shop
Want a friend to have the files? Send them this page. Read the full license
$2.49
3ML-098 · Battery organizer
Battery Organizer
A one-piece three-step desk stand for 8 AA, 10 AAA, two 9V batteries and six CR2032 coin cells, with raised labels on every row. STL + 3MF · 1.3 MB View model
$2.49
3ML-099 · Propagation station
Propagation Station
A one-piece rainbow-arch stand that holds three test tubes of water for rooting plant cuttings. STL + 3MF · 2.6 MB View model
$2.49
3ML-095 · Earring holder
Earring Holder
A one-piece heart earring display: 36 stud holes in a fan panel, 13 hook notches on a top bar and an oval tray for rings. STL + 3MF · 6.9 MB View model
$2.49
3ML-089 · Remote holder
Remote Holder
A one-piece tabletop holder with four stepped rows: three remotes and a phone, each one easy to see and grab, with nothing to put together. STL + 3MF · 1.7 MB View model
$2.49
3ML-090 · Controller stand
Game Controller Stand
A one-piece desk stand that shows off a game controller standing upright, grips resting in two rounded saddles and its back on a leaning backrest with a teal stripe. STL + 3MF · 5.5 MB View model
$2.49
3ML-087 · Drill holder
Pegboard Drill Holder
A one-piece cordless drill holder that hooks straight onto SKADIS-style pegboard: a cradle for the drill, a tray for the spare battery and four bit holes, with no screws. STL + 3MF · 151 KB View model
$2.49
3ML-083 · Bag clips
Bag Clips
Snack bag clips in three sizes that print in one go with the hinge already inside: fold them shut once and they snap closed. STL + 3MF · 1.2 MB View model
$3.79
3ML-070 · Monitor riser
Monitor Stand
A softly rounded desk riser that lifts your monitor 10 cm, with room to slide a keyboard underneath and a notch at the back for the cables. It goes together by hand: no screws, glue or tools. STL + 3MF · 260 KB View model
$2.49
3ML-059 · Spinning tops
Halloween Spinning Tops
Four Halloween finger tops: stacked heirloom pumpkins, a witch hat, a candy corn and an eyeball that flips over to stare at you. STL + 3MF · 13 MB View model
$2.49
3ML-056 · Spinning tops
Spinning Tops Set
Five chunky finger-spun tops, from a classic onion top to a flip top that turns over and a little Christmas tree. STL + 3MF · 32 MB View model
$3.79
3ML-057 · Glasses stand
Glasses Stand
Three friendly places to park your glasses: a sculpted nose, a simple arch and a sitting cat. STL + 3MF · 12 MB View model
$2.49
3ML-052 · Worry stone
Worry Stones
Six pocket worry stones with a smooth, deep thumb dip: a classic oval, a rippled oval, a heart, a leaf, a paw and a turtle. STL + 3MF · 8.4 MB View model
$3.79
3ML-055 · Laptop stand
Folding Laptop Stand
Two slim stands, one under each side of your laptop, tilt the keyboard for comfortable typing and fold flat into your bag. STL + 3MF · 665 KB View model
$3.79
3ML-048 · Air plant holder
Air Plant Holders
Four airy little homes for air plants: a faceted cradle, a hanging hexagon, a whale and a wall ring with a cup. STL + 3MF · 4.9 MB View model
$3.79
3ML-050 · Spool holder
Filament Spool Holder
A sturdy desk cradle with two long ribbed rollers: set your spool on top and it turns freely as your printer pulls. STL + 3MF · 607 KB View model
$3.79
3ML-042 · Watch stand
Watch Stand
A soft-looking cushion your watch wraps around, on a rounded base with a little tray for rings and cufflinks. For one watch or three. STL + 3MF · 1.6 MB View model
$3.79
3ML-047 · Business card holder
Business Card Holder Set
Three softly rounded desk holders for your business cards: a sloping wedge, a wave cradle and one with a trough for your pen. STL + 3MF · 862 KB View model
$3.79
3ML-039 · Spice rack