3MFLABS
Sign up freeSign up
Two 3D-printed charcoal grey laptop stands under a silver laptop on a light oak desk, each slim bar sloping up from a small front lip to a fold-out leg, a mug and a plant by the window behind.
Folding Laptop Stand Tilt it up,
fold it flat.
Fold-out leg Front lip

Print facts

Each stand
220 x 28 mm
Slope
14 degrees
Print time
5 h 12 min
Filament
87 g
Supports
None
Set up for
P2S

01About

Lift the back of your laptop for more comfortable typing and better airflow. Put one stand under each side: the front rests on the desk behind a small rounded lip, and a fold-out leg holds the back up, so the keyboard tilts about 14 degrees with the back about 63 mm up. Low rounded ridges along the top keep the laptop steady without rubber pads.

When you are done, the leg swings back into a recess in the underside and each stand becomes one flat bar, 220 x 28 mm and 12 mm thick, easy to slip into a bag.

Each stand prints in one piece with its leg already attached on a print-in-place hinge, flat as it folds and with no supports. A firm stop takes the laptop's weight when the leg is open, and a small bump holds it open or folded. No pins, screws or glue.

One color, no AMS needed. The 3MF projects are set up for a Bambu Lab P2S, and the STLs print on any printer. Use the two stands together for a laptop up to about 3 kg. The license lets you sell the stands you make.

  • Tilts the keyboard 14 degrees
  • Folds flat for a bag
  • Print-in-place hinged leg
  • No supports, no screws
  • One color, no AMS
  • Sell the stands you make
  • Home
  • Laptop stand
  • Desk
  • Print in place

  1. Open the 3MF in Bambu Studio

    Open it as a project (File, then Open Project). The printer, plate and settings are already saved, so there's nothing to set up. Printing on another brand? Use the STL files with the settings below.

  2. Load your filament

    One color:

    • StandCharcoal grey

  3. Print

    Print it flat as supplied, with no supports: each leg prints already attached.

Print the leg and bar together exactly as supplied: do not split, separate or auto-arrange them. Keep the scale at 100%, or the hinge clearances change. Times are for the pair plate (one stand: about 2 h 41 min, 44 g).

Printing on another printer or slicer? See the settings

The 3MF projects have these settings saved for a Bambu Lab P2S. Using the STLs on another printer? These are the settings they were made with.

Printer
Bambu Lab P2S, 0.4 mm nozzle, textured PEI plate
Material
PLA, one color
Layer height
0.20 mm, first layer 0.20 mm
Walls
4, with 5 top and 5 bottom layers
Infill
20% gyroid
Orientation
Flat as supplied, folded, underside down
Supports
None: keep supports out of the moving gaps
Brim
None

03What to print

2 layouts. Two stands: Laptop-Stand-Single twice, or Laptop-Stand-Pair once:

PartHow manyColor
One complete stand with its leg attached: print it twiceLaptop-Stand-Single1×Charcoal grey
Both stands on one plate: print it onceLaptop-Stand-Pair1×Charcoal grey

Each layout comes as a 3MF project and as an STL: use one or the other, not both.

04Getting it ready

  1. Free the hinge

    Let the prints cool fully. Hold each bar near its hinge and gently flex and rock the leg a little at a time until it swings freely. Don't pry it with tools.

  2. Open the legs

    Swing each leg down and back until it meets its firm stop. A little resistance from the small holding bump is normal.

  3. Set up your laptop

    Put one stand under each side of the laptop, front lips lined up, and rest the laptop on the ridges with its front edge behind both lips. Keep the air vents clear.

  4. Fold for travel

    Lift the laptop off, then swing each leg back into the recess underneath until it sits flush.

The full notes, including fit and safety tips, are in START_HERE.txt inside the download. Never fold a stand with the laptop on it. Keep PLA away from hot cars, heaters and hot exhaust vents.

05Selling your prints

Every download comes with a license that lets you sell the physical prints you make. The full terms are in LICENSE.txt inside the ZIP.

You can

  • Print it for yourself, family and friends, and as gifts
  • Sell physical prints, with no quantity limit or royalty
  • Change the files for your own printing, and sell prints of those too
  • Use your own photos of your prints to sell them

You can't

  • Share, upload, sell or give away the files, or remixes of them
  • Pass the files on with a print you sell
  • Claim the design as yours, or imply 3MF Labs endorses your shop

Want a friend to have the files? Send them this page. Read the full license

Home

More Home designs

See them all
A charcoal and teal 3D-printed three-step battery organizer on a walnut desk, holding rows of AA and AAA batteries, two 9V batteries and six coin cells, with a pegboard of tools behind it. $2.49 3ML-098 · Battery organizer

Battery Organizer

A one-piece three-step desk stand for 8 AA, 10 AAA, two 9V batteries and six CR2032 coin cells, with raised labels on every row. STL + 3MF · 1.3 MB View model A sage and cream 3D-printed rainbow arch propagation station on an oak shelf by a window, holding three glass test tubes of water with rooting plant cuttings. $2.49 3ML-099 · Propagation station

Propagation Station

A one-piece rainbow-arch stand that holds three test tubes of water for rooting plant cuttings. STL + 3MF · 2.6 MB View model A rose pink and white 3D-printed heart earring holder on a pale oak dressing table, with gold hook earrings on its top bar, gold and pearl studs in its panel and two gold rings and a chain in its oval tray. $2.49 3ML-095 · Earring holder

Earring Holder

A one-piece heart earring display: 36 stud holes in a fan panel, 13 hook notches on a top bar and an oval tray for rings. STL + 3MF · 6.9 MB View model A warm white 3D-printed remote holder on an oak side table beside a grey sofa, with three black remotes standing in its stepped rows and a phone lying sideways in the front row. $2.49 3ML-089 · Remote holder

Remote Holder

A one-piece tabletop holder with four stepped rows: three remotes and a phone, each one easy to see and grab, with nothing to put together. STL + 3MF · 1.7 MB View model A charcoal grey 3D-printed game controller stand with a teal top stripe on a walnut desk, holding a black gamepad upright by its grips, with a charging cable, a keyboard and a small plant behind. $2.49 3ML-090 · Controller stand

Game Controller Stand

A one-piece desk stand that shows off a game controller standing upright, grips resting in two rounded saddles and its back on a leaning backrest with a teal stripe. STL + 3MF · 5.5 MB View model A charcoal 3D-printed drill holder hanging on a white slotted pegboard, holding a grey cordless drill upside down in its cradle with the battery resting on top and the nose pointing out, a spare battery in its side tray and two drill bits in its bit holes, with a wooden workbench behind. $2.49 3ML-087 · Drill holder

Pegboard Drill Holder

A one-piece cordless drill holder that hooks straight onto SKADIS-style pegboard: a cradle for the drill, a tray for the spare battery and four bit holes, with no screws. STL + 3MF · 151 KB View model Three 3D-printed bag clips on a light oak kitchen counter: a small yellow clip and a long teal clip shut, and a coral clip opened to show its ribbed jaws and square latch, with a folded kraft paper bag, a bowl of pretzels and a potted herb behind. $2.49 3ML-083 · Bag clips

Bag Clips

Snack bag clips in three sizes that print in one go with the hinge already inside: fold them shut once and they snap closed. STL + 3MF · 1.2 MB View model A 3D-printed charcoal grey monitor stand on a light oak desk, a silver monitor on its rounded shelf, a white keyboard tucked into the gap underneath, and arched openings in both end legs, with a mug and a small plant by the window behind. $3.79 3ML-070 · Monitor riser

Monitor Stand

A softly rounded desk riser that lifts your monitor 10 cm, with room to slide a keyboard underneath and a notch at the back for the cables. It goes together by hand: no screws, glue or tools. STL + 3MF · 260 KB View model Four 3D-printed Halloween spinning tops on a dark wooden table: a stack of orange, cream and sage pumpkins, a black witch hat with a purple band, a candy corn and a white eyeball. $2.49 3ML-059 · Spinning tops

Halloween Spinning Tops

Four Halloween finger tops: stacked heirloom pumpkins, a witch hat, a candy corn and an eyeball that flips over to stare at you. STL + 3MF · 13 MB View model Five 3D-printed spinning tops in red, teal, yellow, dark grey and green standing on a light oak table, the green one shaped like a little Christmas tree. $2.49 3ML-056 · Spinning tops

Spinning Tops Set

Five chunky finger-spun tops, from a classic onion top to a flip top that turns over and a little Christmas tree. STL + 3MF · 32 MB View model Three 3D-printed glasses stands on a light oak nightstand, a peach nose, a charcoal arch and a cream sitting cat, each holding a pair of round wire glasses, a plant by the window behind. $3.79 3ML-057 · Glasses stand

Glasses Stand

Three friendly places to park your glasses: a sculpted nose, a simple arch and a sitting cat. STL + 3MF · 12 MB View model Two stacked 3D-printed warm white coffee pod drawers on a pale stone kitchen counter, the top drawer pulled out with silver-lidded pods standing in it, a loose white 12-pod tray beside them, a coffee machine and a mug of black coffee behind. $3.79 3ML-058 · Coffee pod organizer

Coffee Pod Drawer

Stackable pull-out drawers that hold 12 single-serve coffee pods each, plus a matching loose tray. STL + 3MF · 624 KB View model Six 3D-printed worry stones on a linen cloth on a light oak side table by a window, beside a mug of tea and a small plant: a sage oval, a blue rippled oval, a pink heart, an olive leaf, a caramel paw and a teal turtle. $2.49 3ML-052 · Worry stone

Worry Stones

Six pocket worry stones with a smooth, deep thumb dip: a classic oval, a rippled oval, a heart, a leaf, a paw and a turtle. STL + 3MF · 8.4 MB View model Four 3D-printed air plant holders by a sunny window, each with a small air plant: a dark green wall ring with a cup and an olive hexagon hanging from twine on the wall, a white faceted bowl and a caramel whale on a light oak shelf below. $3.79 3ML-048 · Air plant holder

Air Plant Holders

Four airy little homes for air plants: a faceted cradle, a hanging hexagon, a whale and a wall ring with a cup. STL + 3MF · 4.9 MB View model A 3D-printed charcoal grey filament spool holder on a light oak desk, a spool of orange filament resting on its two ribbed rollers, a 3D printer in the background. $3.79 3ML-050 · Spool holder

Filament Spool Holder

A sturdy desk cradle with two long ribbed rollers: set your spool on top and it turns freely as your printer pulls. STL + 3MF · 607 KB View model A 3D-printed watch stand on a walnut desk: a rounded charcoal base with an oval tray holding a ring and cufflinks, and a caramel cushion with a leather-strap watch wrapped around it, a notebook and fountain pen behind. $3.79 3ML-042 · Watch stand

Watch Stand

A soft-looking cushion your watch wraps around, on a rounded base with a little tray for rings and cufflinks. For one watch or three. STL + 3MF · 1.6 MB View model Three 3D-printed business card holders on a light oak desk, each holding a stack of blank white cards: a caramel holder with a black pen in its front trough, an olive green wave cradle and a white sloping wedge with a finger notch, a laptop and a small plant behind. $3.79 3ML-047 · Business card holder

Business Card Holder Set

Three softly rounded desk holders for your business cards: a sloping wedge, a wave cradle and one with a trough for your pen. STL + 3MF · 862 KB View model Two joined 3D-printed spice stands in warm white on a wooden kitchen counter, each with three stepped shelves holding round glass spice jars of paprika, turmeric, herbs, pepper and chili flakes, with a basil plant and a cutting board behind. $3.79 3ML-039 · Spice rack

Modular Spice Rack

Three-step spice stands that slide together side by side, so you can print as many as your cupboard needs. Plus a pull-out tray for inside a cabinet. STL + 3MF · 54 KB View model