for your watch.
Print facts
- Base
- 110 x 85 mm
- Height
- 80 mm
- Print time
- 3 h 24 min
- Filament
- 105 g
- Supports
- Cushion feet
- Set up for
- P2S
01About
A tidy place to rest your watch at night. The strap wraps around a softly rounded cushion with the face to the front, and the cushion leans back a little so the dial is easy to read. In front of it, a shallow oval tray holds a ring, cufflinks or earrings.
Choose a single stand (110 x 85 mm) or a three-watch display (205 x 85 mm) that uses the same cushion three times. It fits closed straps and bracelets of about 160 to 200 mm, up to 26 mm wide.
The cushion presses into a socket in the base on two feet and lifts out to load the watch. No glue, screws or tools.
Two parts, each in one color: no AMS needed. Charcoal and caramel look smart, or print it all in one color. The 3MF projects are set up for a Bambu Lab P2S, and the STLs print on any printer. The license lets you sell the stands you make.
- Fits straps of about 160-200 mm
- Ring and cufflink tray
- Single and three-watch versions
- Cushion lifts out to load the watch
- No AMS, no glue
- Sell the stands you make
02How to print
Open the 3MF in Bambu Studio
Open it as a project (File, then Open Project). The printer, plate and settings are already saved, so there's nothing to set up. Printing on another brand? Use the STL files with the settings below.
Load your filament
You need two colors:
- BaseCharcoal black
- CushionCaramel tan
Print
Print everything on the list below, then put it together.
Keep the cushion on its side as supplied, so its feet come out strong; the 3MF keeps supports off the visible cushion faces. With an STL, paint supports on the free socket foot only. Keep the scale at 100%, or the cushion won't fit its socket.
Printing on another printer or slicer? See the settings
The 3MF projects have these settings saved for a Bambu Lab P2S. Using the STLs on another printer? These are the settings they were made with.
- Printer
- Bambu Lab P2S, 0.4 mm nozzle, textured PEI plate
- Material
- PLA, one color per part
- Layer height
- 0.20 mm, first layer 0.20 mm
- Walls
- 4, with 5 top and 5 bottom layers
- Infill
- 25% gyroid
- Orientation
- Bases flat on their bottoms; the cushion lies on its narrow side
- Supports
- Base none. Cushion: a small support on its hidden socket feet only, set in the 3MF
- Brim
- None
03What to print
4 layouts. Single: Base-Single + Pillow. Three watches: Base-Triple + Pillow-Triple:
| Part | How many | Color |
|---|---|---|
| One base with an oval ring tray and a socket for one cushionBase-Single | 1× | Charcoal black |
| A long base with a long tray and sockets for three cushionsBase-Triple | 1× | Charcoal black |
| One watch cushion, printed on its sidePillow | 1× | Caramel tan |
| Three of the same cushion on one platePillow-Triple | 1× | Caramel tan |
Each layout comes as a 3MF project and as an STL: use one or the other, not both.
04Putting it together
Print the base and cushion
Print the base flat and the cushion on its side as supplied. Let them cool, then peel the small support from between the cushion's two feet.
Put the watch on
With the cushion out of the base, slide the closed strap over its rounded top and guide the lower loop between the two feet, the watch face to the front. A buckled strap: wrap it round and fasten it loosely.
Press the cushion in
Line the two feet up with the socket in the base and press down evenly by hand until it sits snug, the watch face toward the tray.
Change watches
Hold the base and lift the cushion straight up by its sides, not by the watch.
The full notes, including strap sizes and fit tips, are in START_HERE.txt inside the download. The cushion is rigid, not foam: never force a tight band over it. Keep PLA away from hot cars and strong sun.
05Selling your prints
Every download comes with a license that lets you sell the physical prints you make. The full terms are in LICENSE.txt inside the ZIP.
You can
- Print it for yourself, family and friends, and as gifts
- Sell physical prints, with no quantity limit or royalty
- Change the files for your own printing, and sell prints of those too
- Use your own photos of your prints to sell them
You can't
- Share, upload, sell or give away the files, or remixes of them
- Pass the files on with a print you sell
- Claim the design as yours, or imply 3MF Labs endorses your shop
Want a friend to have the files? Send them this page. Read the full license
$2.49
3ML-098 · Battery organizer
Battery Organizer
A one-piece three-step desk stand for 8 AA, 10 AAA, two 9V batteries and six CR2032 coin cells, with raised labels on every row. STL + 3MF · 1.3 MB View model
$2.49
3ML-099 · Propagation station
Propagation Station
A one-piece rainbow-arch stand that holds three test tubes of water for rooting plant cuttings. STL + 3MF · 2.6 MB View model
$2.49
3ML-095 · Earring holder
Earring Holder
A one-piece heart earring display: 36 stud holes in a fan panel, 13 hook notches on a top bar and an oval tray for rings. STL + 3MF · 6.9 MB View model
$2.49
3ML-089 · Remote holder
Remote Holder
A one-piece tabletop holder with four stepped rows: three remotes and a phone, each one easy to see and grab, with nothing to put together. STL + 3MF · 1.7 MB View model
$2.49
3ML-090 · Controller stand
Game Controller Stand
A one-piece desk stand that shows off a game controller standing upright, grips resting in two rounded saddles and its back on a leaning backrest with a teal stripe. STL + 3MF · 5.5 MB View model
$2.49
3ML-087 · Drill holder
Pegboard Drill Holder
A one-piece cordless drill holder that hooks straight onto SKADIS-style pegboard: a cradle for the drill, a tray for the spare battery and four bit holes, with no screws. STL + 3MF · 151 KB View model
$2.49
3ML-083 · Bag clips
Bag Clips
Snack bag clips in three sizes that print in one go with the hinge already inside: fold them shut once and they snap closed. STL + 3MF · 1.2 MB View model
$3.79
3ML-070 · Monitor riser
Monitor Stand
A softly rounded desk riser that lifts your monitor 10 cm, with room to slide a keyboard underneath and a notch at the back for the cables. It goes together by hand: no screws, glue or tools. STL + 3MF · 260 KB View model
$2.49
3ML-059 · Spinning tops
Halloween Spinning Tops
Four Halloween finger tops: stacked heirloom pumpkins, a witch hat, a candy corn and an eyeball that flips over to stare at you. STL + 3MF · 13 MB View model
$2.49
3ML-056 · Spinning tops
Spinning Tops Set
Five chunky finger-spun tops, from a classic onion top to a flip top that turns over and a little Christmas tree. STL + 3MF · 32 MB View model
$3.79
3ML-057 · Glasses stand
Glasses Stand
Three friendly places to park your glasses: a sculpted nose, a simple arch and a sitting cat. STL + 3MF · 12 MB View model
$3.79
3ML-058 · Coffee pod organizer
Coffee Pod Drawer
Stackable pull-out drawers that hold 12 single-serve coffee pods each, plus a matching loose tray. STL + 3MF · 624 KB View model
$2.49
3ML-052 · Worry stone
Worry Stones
Six pocket worry stones with a smooth, deep thumb dip: a classic oval, a rippled oval, a heart, a leaf, a paw and a turtle. STL + 3MF · 8.4 MB View model
$3.79
3ML-055 · Laptop stand
Folding Laptop Stand
Two slim stands, one under each side of your laptop, tilt the keyboard for comfortable typing and fold flat into your bag. STL + 3MF · 665 KB View model
$3.79
3ML-048 · Air plant holder
Air Plant Holders
Four airy little homes for air plants: a faceted cradle, a hanging hexagon, a whale and a wall ring with a cup. STL + 3MF · 4.9 MB View model
$3.79
3ML-050 · Spool holder
Filament Spool Holder
A sturdy desk cradle with two long ribbed rollers: set your spool on top and it turns freely as your printer pulls. STL + 3MF · 607 KB View model
$3.79
3ML-047 · Business card holder
Business Card Holder Set
Three softly rounded desk holders for your business cards: a sloping wedge, a wave cradle and one with a trough for your pen. STL + 3MF · 862 KB View model
$3.79
3ML-039 · Spice rack