Printing and slicing
Bambu Studio, multicolor printing, settings and fixing failed prints, in plain words.
Printing and slicingPrime Tower in Bambu Studio: When to Remove It, and How to Cut Purge Waste
What the prime tower does, how to remove it in Bambu Studio, why multicolor prints should keep it, and seven ways to cut purge waste, with real numbers.
Printing and slicingStringing on Your Prints? Dry Your Filament (and 3 Other Fixes)
Why 3D prints string and how to fix it: check for wet filament, Bambu's PLA and PETG drying numbers, then three simple setting changes to try in order.
Printing and slicingHow Much Does It Cost to 3D Print Something? Real Numbers From Our Designs
How much it costs to 3D print: filament and power across 74 real designs (median $2.17, about 4.5 hours), service rates, and when a printer pays off.
Printing and slicingHow to Paint Colors in Bambu Studio (and When a Filament Swap Is Easier)
How to paint colors in Bambu Studio step by step: the six tools, the shortcuts, what painting costs in print time, and when a spool swap is the easier way.
Printing and slicingPLA vs PETG for Things You'll Sell: Lanterns, Bowls and Outdoor Decor
PLA vs PETG for things you sell: real heat and strength numbers, which items need PETG (clips, outdoor decor, holders) and how to switch a PLA project.
Printing and slicingHow to Add Supports in Bambu Studio (and Make Them Easy to Remove)
How to add supports in Bambu Studio step by step: tree or normal, support only where needed, and the settings that make supports easy to remove cleanly.
Printing and slicingWill It Fit? A1 Mini Build Volume and How to Check a File Before You Print
The Bambu A1 mini prints up to 180 x 180 x 180 mm. How to check any file fits before you print, what to do when it doesn't, and real sizes from our designs.
Printing and slicingPrint-in-Place and Flexi Prints: What It Means and How to Print Them Without Fused Joints
What print in place means, how flexi joints work, the five reasons joints fuse (scale, first layer, supports, flow, filament) and how to free a stiff one.
Printing and slicingIs PLA Food Safe? What It Means for Candy Bowls and Cookie Cutters
Is PLA food safe? The resin is used in food packaging, but prints have layer lines and soften near 60 °C. What's fine, like wrapped candy and cookie cutters.
Printing and slicingBambu Studio for Beginners: Open a Ready-Made 3MF and Print It in 5 Steps
How to use Bambu Studio as a beginner: open a ready-made 3MF as a project, set your printer and filament, slice, and send it to print, in five plain steps.
Printing and slicingDo You Need an AMS? One-Color, Filament-Swap and Multicolor Prints Explained
Do you need an AMS for multicolor 3D prints? How to tell from the design, how to swap colors with a pause instead, and what full color really costs.
Printing and slicing3D Printed Earrings: How to Print Them, Add the Hooks and What to Charge
How to 3D print earrings: flat layered charms, colors without an AMS, ear wires for sensitive ears, and what a pair really costs, with real numbers.Find something to print
Original designs that open ready to print, with the right to sell what you make.