on the plate.
Print facts
- Name
- You type it
- Hooks
- 5
- Width
- 200 mm
- Print time
- About 6.5 h
- Filament
- 214 g
- AMS
- Not needed
01About
The back of a 1969 muscle car coupe backing out of your wall: the low roof and wide rear window, the wide haunches, two wide tail lights with silver bars, a slim silver bumper with two guards, fat black tyres tucked up under the body, and five key hooks in a row under the car. Plain colors of your choice, with no badges, stripes or lettering except the name you put on the plate.
Put a name on the licence plate by typing: open the plate's 3MF in Bambu Studio, click the part called name_text, pick the Text tool and type. The letters redraw on the plate. The name comes in at 8 mm, and names of up to 8 capital letters fit; the guide says which size to use for longer ones. The editable name needs Bambu Studio and the 3MF file; the STL prints the plate blank.
It is 200 mm wide, 141 mm tall and 50 mm deep. No AMS needed: each of the five prints is one color (body, black parts, silver bumper, red tail lights, white plate), with one optional filament swap for the silver light bars and one for the black name. Short on colors? The body and the black parts alone already show the whole car.
The 13 pieces push together by hand, with no glue, no screws and no tools, and a small fit test prints first in about 17 minutes. It hangs on two screws or nails 120 mm apart, and once it hangs, the wall holds the tyres and hooks in place. The whole set takes about 6 h 24 min and 214 g of PLA. The license lets you sell the prints you make.
- Type any name in Bambu Studio
- Five key hooks
- No AMS: one color per print
- Pushes together, no glue
- Hangs on two screws
- Sell the prints you make
02How to print
Open the 3MF in Bambu Studio
Open it as a project (File, then Open Project). The printer, plate and settings are already saved, so there's nothing to set up. Printing on another brand? Use the STL files with the settings below.
Load your filament
You need 5 colors:
- BodyAny color (red in the pictures)
- Window, tyres, hooks, nameBlack
- Bumper and light barsSilver or grey
- Tail lightsRed
- PlateWhite
Print
Print everything on the list below, then put it together.
The tail lights and the plate each have one filament swap at layer 16 (silver bars, black name). With an AMS, map the two colors and print. Without one, add a pause at layer 16 and swap the spool by hand, or skip the swap on the lights. The slicer may mention small bridges in the back of the body: they print cleanly without supports. Keep the scale at 100%: scaling changes the fits.
Printing on another printer or slicer? See the settings
The 3MF projects have these settings saved for a Bambu Lab P2S. Using the STLs on another printer? These are the settings they were made with.
- Printer
- Bambu Lab P2S, 0.4 mm nozzle, textured PEI plate
- Material
- Regular PLA
- Layer height
- 0.20 mm
- Walls
- 3
- Infill
- Gyroid: body 10%, black parts and bumper 15%, tail lights and plate 25%
- Supports
- Off, no brim
- Orientation
- As supplied: body flat on its back, tyres and hooks on their side, window face down
03What to print
5 prints and a fit test, 13 pieces. Five prints:
| Part | How many | Color |
|---|---|---|
| Print it first: about 17 min / 4 g69-Muscle-Car-Fit-Test | 1 block, 1 strip, 1 hook head | Any |
| 199 x 114 mm on the plate, about 3 h 59 min / 153 g69-Muscle-Car-Body | 1 body | Your color |
| About 1 h 25 min / 42 g69-Muscle-Car-Black-Parts | Rear window, 2 tyres, 5 hooks | Black |
| About 25 min / 9 g69-Muscle-Car-Bumper | 1 bumper with two guards | Silver |
| About 19 min / 5 g69-Muscle-Car-Tail-Lights | 2 tail lights | Red, silver bars |
| About 16 min / 4 g; the 3MF has the editable name69-Muscle-Car-Plate | 1 licence plate | White, black name |
Each print comes as a 3MF and an STL: pick one format per print, not both. The plate STL is blank; the name is in the 3MF.
04Your name, then put it together
Type the name
Open 69-Muscle-Car-Plate.3mf in Bambu Studio, click Objects, click the part called name_text, pick the Text tool (the T in the top toolbar) and type the name. If a long name runs past the edge of the plate, lower Size.
Fit the front
Push each tail light into its pocket, slanted end pointing outward. Lay the rear window in its recess, wide edge down. Push the plate onto its two pegs, then slide the bumper over its rail with the guards pointing down.
Add tyres and hooks
Turn the body face down on a soft cloth. Drop each tyre into its pocket (each fits one side only) and slide the five hooks into their slots until they sit level with the back.
Hang it
Put two screws or nails level, 120 mm apart, with the heads 3 mm out from the wall. Hold the tyres and hooks in, hang the holder over the heads and pull it down into the slots.
You add two wall screws or nails (4 mm screws with 7 to 8 mm heads). Never force a part: if the fit test is tight on your printer, the guide in the download says what to change. Made for key bunches, about 100 g per hook. Small parts: keep away from young children. Keep PLA away from heat.
05Selling your prints
Every download comes with a license that lets you sell the physical prints you make. The full terms are in LICENSE.txt inside the ZIP.
You can
- Print it for yourself, family and friends, and as gifts
- Sell physical prints, with no quantity limit or royalty
- Change the files for your own printing, and sell prints of those too
- Use your own photos of your prints to sell them
You can't
- Share, upload, sell or give away the files, or remixes of them
- Pass the files on with a print you sell
- Claim the design as yours, or imply 3MF Labs endorses your shop
Want a friend to have the files? Send them this page. Read the full license
What buyers say
Hundreds of sales so far, and buyers keep leaving 5-star reviews.
-
Perfect all around. Great designs, great price, can't say enough. Do recommend and will buy more!
High Temp Arts, Holiday earrings -
Customer service is outstanding! Went above and beyond expectations along with the files I purchased.
Etsy buyer -
Super cute files and easy to use!
Etsy buyer, Christmas ornaments
$4.99
3ML-132 · Personalized key holder
Muscle Car Key Holder
A wall key holder shaped like the back of a classic muscle car, with four key hooks and a name on the licence plate. Type any name in Bambu Studio, no design skills needed. STL + 3MF · 4.1 MB View model
$2.49
3ML-098 · Battery organizer
Battery Organizer
A one-piece three-step desk stand for 8 AA, 10 AAA, two 9V batteries and six CR2032 coin cells, with raised labels on every row. STL + 3MF · 1.3 MB View model
$2.49
3ML-099 · Propagation station
Propagation Station
A one-piece rainbow-arch stand that holds three test tubes of water for rooting plant cuttings. STL + 3MF · 2.6 MB View model
$2.49
3ML-095 · Earring holder
Earring Holder
A one-piece heart earring display: 36 stud holes in a fan panel, 13 hook notches on a top bar and an oval tray for rings. STL + 3MF · 6.9 MB View model
$2.49
3ML-089 · Remote holder
Remote Holder
A one-piece tabletop holder with four stepped rows: three remotes and a phone, each one easy to see and grab, with nothing to put together. STL + 3MF · 1.7 MB View model
$2.49
3ML-090 · Controller stand
Game Controller Stand
A one-piece desk stand that shows off a game controller standing upright, grips resting in two rounded saddles and its back on a leaning backrest with a teal stripe. STL + 3MF · 5.5 MB View model
$2.49
3ML-087 · Drill holder
Pegboard Drill Holder
A one-piece cordless drill holder that hooks straight onto SKADIS-style pegboard: a cradle for the drill, a tray for the spare battery and four bit holes, with no screws. STL + 3MF · 151 KB View model
$2.49
3ML-083 · Bag clips
Bag Clips
Snack bag clips in three sizes that print in one go with the hinge already inside: fold them shut once and they snap closed. STL + 3MF · 1.2 MB View model
$3.79
3ML-070 · Monitor riser
Monitor Stand
A softly rounded desk riser that lifts your monitor 10 cm, with room to slide a keyboard underneath and a notch at the back for the cables. It goes together by hand: no screws, glue or tools. STL + 3MF · 260 KB View model
$2.49
3ML-059 · Spinning tops
Halloween Spinning Tops
Four Halloween finger tops: stacked heirloom pumpkins, a witch hat, a candy corn and an eyeball that flips over to stare at you. STL + 3MF · 13 MB View model
$2.49
3ML-056 · Spinning tops
Spinning Tops Set
Five chunky finger-spun tops, from a classic onion top to a flip top that turns over and a little Christmas tree. STL + 3MF · 32 MB View model
$3.79
3ML-057 · Glasses stand
Glasses Stand
Three friendly places to park your glasses: a sculpted nose, a simple arch and a sitting cat. STL + 3MF · 12 MB View model
$3.79
3ML-058 · Coffee pod organizer
Coffee Pod Drawer
Stackable pull-out drawers that hold 12 single-serve coffee pods each, plus a matching loose tray. STL + 3MF · 624 KB View model
$2.49
3ML-052 · Worry stone
Worry Stones
Six pocket worry stones with a smooth, deep thumb dip: a classic oval, a rippled oval, a heart, a leaf, a paw and a turtle. STL + 3MF · 8.4 MB View model
$3.79
3ML-055 · Laptop stand
Folding Laptop Stand
Two slim stands, one under each side of your laptop, tilt the keyboard for comfortable typing and fold flat into your bag. STL + 3MF · 665 KB View model
$3.79
3ML-048 · Air plant holder
Air Plant Holders
Four airy little homes for air plants: a faceted cradle, a hanging hexagon, a whale and a wall ring with a cup. STL + 3MF · 4.9 MB View model
$3.79
3ML-050 · Spool holder
Filament Spool Holder
A sturdy desk cradle with two long ribbed rollers: set your spool on top and it turns freely as your printer pulls. STL + 3MF · 607 KB View model
$3.79
3ML-042 · Watch stand
Watch Stand
A soft-looking cushion your watch wraps around, on a rounded base with a little tray for rings and cufflinks. For one watch or three. STL + 3MF · 1.6 MB View model
$3.79
3ML-047 · Business card holder
Business Card Holder Set
Three softly rounded desk holders for your business cards: a sloping wedge, a wave cradle and one with a trough for your pen. STL + 3MF · 862 KB View model
$3.79
3ML-039 · Spice rack