A red 3D-printed muscle car key holder on a light wall: the back of a fastback car with a silver bumper, a white plate reading WILLIAM, black tyres and four black hooks with house keys hanging from two of them.
Muscle Car Key Holder Your name
on the plate.
Editable name
The red muscle car key holder seen straight on, on a light grey garage wall, with the plate reading WILLIAM and three bunches of keys hanging from its hooks.
In useKeys on the hooks
The black press-in parts on a wooden bench: two tyres with square pegs, four S-shaped key hooks and the long rear window strip, next to a house key.
The partsTyres, hooks and window
The flat red back of the key holder with two keyhole slots for wall screws, lying on a bench beside two screws and a screwdriver.
The backTwo keyhole slots

Print facts

Key hooks
4
Name
You type it
Size
200 x 102 mm
Colors
4, AMS
Supports
None
Set up for
P2S, PLA

01About

The back half of a classic fastback muscle car driving into your wall: a red body, black rear window, wide red tail lights with black rings, a silver bumper and twin exhaust tips, fat black tyres tucked under the wheel arches, and four black key hooks under the bumper. Our own car design, with no badges or brand look.

Put a name on the licence plate by typing: open the body's 3MF in Bambu Studio, click the part called name_text, pick the Text tool and type. The letters redraw on the plate. The name comes in at 8 mm, and up to 8 capital letters fit (most 9-letter names too). The editable name needs Bambu Studio and the 3MF file; the STL prints the plate blank.

About 200 mm wide, 102 mm tall with the hooks and 45 mm deep. The full-color body needs an AMS (red, black, silver and white, with every color change in the top 8 mm); without one, print the body STL in one color. The tyres, window and hooks are a second print in black.

Everything presses together by hand, no glue: the window, tyres and hooks push into their sockets, which have small ribs that grip. It hangs on two screws or nails 120 mm apart. The license lets you sell the prints you make.

  • Type any name in Bambu Studio
  • Four key hooks
  • Press-fit, no glue
  • Hangs on two screws
  • Our own muscle car design
  • Sell the prints you make
  • Key holder
  • Muscle car
  • Personalized
  • Custom name
  • Car gift
  1. Open the 3MF in Bambu Studio

    Open it as a project (File, then Open Project). The printer, plate and settings are already saved, so there's nothing to set up. Printing on another brand? Use the STL files with the settings below.

  2. Load your filament

    You need four colors:

    • BodyRed
    • Bumper, exhausts, plate frameSilver
    • Tail-light rings and nameBlack
    • Plate faceWhite
  3. Print

    Print everything on the list below, then put it together.

The full-color body needs an AMS: the body is red for the first 29 mm and every color change happens between 29 and 37 mm. Keep the supplied prime tower. No AMS? Print the body STL in one color: the tail lights, bumper and plate are raised, so they still show. Keep the scale at 100%: scaling changes the press fits.

Printing on another printer or slicer? See the settings

The 3MF projects have these settings saved for a Bambu Lab P2S. Using the STL on another printer? These are the settings it was made with.

Printer
Bambu Lab P2S, 0.4 mm nozzle, textured PEI plate
Material
Regular PLA
Layer height
0.20 mm
Walls
3
Infill
15% gyroid (body), 10% (black parts)
Supports
Off, no brim
Orientation
As supplied: body flat on its back, hooks on their side

03What to print

2 prints, 8 pieces. Two prints:

PartHow manyColor
200 x 83.5 x 45 mm, about 7 h 56 min / 170 g in color (6 h 1 min / 134 g in one color)Muscle_Car_Body1 bodyRed + silver, black, white
About 1 h 3 min / 27 gHooks_Tyres_Window4 hooks, 2 tyres, 1 windowBlack

Each print comes as a 3MF and an STL: pick one format per print, not both. Only the body's 3MF carries the editable name.

04Putting it together

  1. Type the name

    Open the body's 3MF as a project in Bambu Studio, click Objects, select name_text, click the Text tool (the T in the top toolbar) and type.

  2. Press in the parts

    Press the window into its recess, push each tyre's peg sideways into its slot under the wheel arch, and push the four hooks straight into the square holes below the bumper.

  3. Hang it

    Fix two screws level, 120 mm apart, heads about 3 mm out from the wall, and lower the keyhole slots on the back over them.

The editable name works in Bambu Studio with the 3MF; the STL has no name. Made for normal bunches of keys, not heavy loads. Keep PLA away from heat, and small parts away from young children and pets.

05Selling your prints

Every download comes with a license that lets you sell the physical prints you make. The full terms are in LICENSE.txt inside the ZIP.

You can

  • Print it for yourself, family and friends, and as gifts
  • Sell physical prints, with no quantity limit or royalty
  • Change the files for your own printing, and sell prints of those too
  • Use your own photos of your prints to sell them

You can't

  • Share, upload, sell or give away the files, or remixes of them
  • Pass the files on with a print you sell
  • Claim the design as yours, or imply 3MF Labs endorses your shop

Want a friend to have the files? Send them this page. Read the full license

What buyers say

Hundreds of sales so far, and buyers keep leaving 5-star reviews.

  • Perfect all around. Great designs, great price, can't say enough. Do recommend and will buy more!

    High Temp Arts, Holiday earrings
  • Customer service is outstanding! Went above and beyond expectations along with the files I purchased.

    Etsy buyer
  • Super cute files and easy to use!

    Etsy buyer, Christmas ornaments

Read every review on Etsy

Home

More Home designs

See them all
A red 3D-printed muscle car key holder on a white wall: the back of a classic coupe with a black rear window, two wide red tail lights, a silver bumper, a white plate reading WILLIAM, black tyres and five black key hooks. $4.99 3ML-135 · Personalized key holder

69 Muscle Car Key Holder

A wall key holder shaped like the back of a 1969 muscle car coupe, with five key hooks and a name on the licence plate. Type any name in Bambu Studio, no design skills needed. No AMS, no glue. STL + 3MF · 19 MB View model
A charcoal and teal 3D-printed three-step battery organizer on a walnut desk, holding rows of AA and AAA batteries, two 9V batteries and six coin cells, with a pegboard of tools behind it. $2.49 3ML-098 · Battery organizer

Battery Organizer

A one-piece three-step desk stand for 8 AA, 10 AAA, two 9V batteries and six CR2032 coin cells, with raised labels on every row. STL + 3MF · 1.3 MB View model
A sage and cream 3D-printed rainbow arch propagation station on an oak shelf by a window, holding three glass test tubes of water with rooting plant cuttings. $2.49 3ML-099 · Propagation station

Propagation Station

A one-piece rainbow-arch stand that holds three test tubes of water for rooting plant cuttings. STL + 3MF · 2.6 MB View model
A rose pink and white 3D-printed heart earring holder on a pale oak dressing table, with gold hook earrings on its top bar, gold and pearl studs in its panel and two gold rings and a chain in its oval tray. $2.49 3ML-095 · Earring holder

Earring Holder

A one-piece heart earring display: 36 stud holes in a fan panel, 13 hook notches on a top bar and an oval tray for rings. STL + 3MF · 6.9 MB View model
A warm white 3D-printed remote holder on an oak side table beside a grey sofa, with three black remotes standing in its stepped rows and a phone lying sideways in the front row. $2.49 3ML-089 · Remote holder

Remote Holder

A one-piece tabletop holder with four stepped rows: three remotes and a phone, each one easy to see and grab, with nothing to put together. STL + 3MF · 1.7 MB View model
A charcoal grey 3D-printed game controller stand with a teal top stripe on a walnut desk, holding a black gamepad upright by its grips, with a charging cable, a keyboard and a small plant behind. $2.49 3ML-090 · Controller stand

Game Controller Stand

A one-piece desk stand that shows off a game controller standing upright, grips resting in two rounded saddles and its back on a leaning backrest with a teal stripe. STL + 3MF · 5.5 MB View model
A charcoal 3D-printed drill holder hanging on a white slotted pegboard, holding a grey cordless drill upside down in its cradle with the battery resting on top and the nose pointing out, a spare battery in its side tray and two drill bits in its bit holes, with a wooden workbench behind. $2.49 3ML-087 · Drill holder

Pegboard Drill Holder

A one-piece cordless drill holder that hooks straight onto SKADIS-style pegboard: a cradle for the drill, a tray for the spare battery and four bit holes, with no screws. STL + 3MF · 151 KB View model
Three 3D-printed bag clips on a light oak kitchen counter: a small yellow clip and a long teal clip shut, and a coral clip opened to show its ribbed jaws and square latch, with a folded kraft paper bag, a bowl of pretzels and a potted herb behind. $2.49 3ML-083 · Bag clips

Bag Clips

Snack bag clips in three sizes that print in one go with the hinge already inside: fold them shut once and they snap closed. STL + 3MF · 1.2 MB View model
A 3D-printed charcoal grey monitor stand on a light oak desk, a silver monitor on its rounded shelf, a white keyboard tucked into the gap underneath, and arched openings in both end legs, with a mug and a small plant by the window behind. $3.79 3ML-070 · Monitor riser

Monitor Stand

A softly rounded desk riser that lifts your monitor 10 cm, with room to slide a keyboard underneath and a notch at the back for the cables. It goes together by hand: no screws, glue or tools. STL + 3MF · 260 KB View model
Four 3D-printed Halloween spinning tops on a dark wooden table: a stack of orange, cream and sage pumpkins, a black witch hat with a purple band, a candy corn and a white eyeball. $2.49 3ML-059 · Spinning tops

Halloween Spinning Tops

Four Halloween finger tops: stacked heirloom pumpkins, a witch hat, a candy corn and an eyeball that flips over to stare at you. STL + 3MF · 13 MB View model
Five 3D-printed spinning tops in red, teal, yellow, dark grey and green standing on a light oak table, the green one shaped like a little Christmas tree. $2.49 3ML-056 · Spinning tops

Spinning Tops Set

Five chunky finger-spun tops, from a classic onion top to a flip top that turns over and a little Christmas tree. STL + 3MF · 32 MB View model
Three 3D-printed glasses stands on a light oak nightstand, a peach nose, a charcoal arch and a cream sitting cat, each holding a pair of round wire glasses, a plant by the window behind. $3.79 3ML-057 · Glasses stand

Glasses Stand

Three friendly places to park your glasses: a sculpted nose, a simple arch and a sitting cat. STL + 3MF · 12 MB View model
Two stacked 3D-printed warm white coffee pod drawers on a pale stone kitchen counter, the top drawer pulled out with silver-lidded pods standing in it, a loose white 12-pod tray beside them, a coffee machine and a mug of black coffee behind. $3.79 3ML-058 · Coffee pod organizer

Coffee Pod Drawer

Stackable pull-out drawers that hold 12 single-serve coffee pods each, plus a matching loose tray. STL + 3MF · 624 KB View model
Six 3D-printed worry stones on a linen cloth on a light oak side table by a window, beside a mug of tea and a small plant: a sage oval, a blue rippled oval, a pink heart, an olive leaf, a caramel paw and a teal turtle. $2.49 3ML-052 · Worry stone

Worry Stones

Six pocket worry stones with a smooth, deep thumb dip: a classic oval, a rippled oval, a heart, a leaf, a paw and a turtle. STL + 3MF · 8.4 MB View model
Two 3D-printed charcoal grey laptop stands under a silver laptop on a light oak desk, each slim bar sloping up from a small front lip to a fold-out leg, a mug and a plant by the window behind. $3.79 3ML-055 · Laptop stand

Folding Laptop Stand

Two slim stands, one under each side of your laptop, tilt the keyboard for comfortable typing and fold flat into your bag. STL + 3MF · 665 KB View model
Four 3D-printed air plant holders by a sunny window, each with a small air plant: a dark green wall ring with a cup and an olive hexagon hanging from twine on the wall, a white faceted bowl and a caramel whale on a light oak shelf below. $3.79 3ML-048 · Air plant holder

Air Plant Holders

Four airy little homes for air plants: a faceted cradle, a hanging hexagon, a whale and a wall ring with a cup. STL + 3MF · 4.9 MB View model
A 3D-printed charcoal grey filament spool holder on a light oak desk, a spool of orange filament resting on its two ribbed rollers, a 3D printer in the background. $3.79 3ML-050 · Spool holder

Filament Spool Holder

A sturdy desk cradle with two long ribbed rollers: set your spool on top and it turns freely as your printer pulls. STL + 3MF · 607 KB View model
A 3D-printed watch stand on a walnut desk: a rounded charcoal base with an oval tray holding a ring and cufflinks, and a caramel cushion with a leather-strap watch wrapped around it, a notebook and fountain pen behind. $3.79 3ML-042 · Watch stand

Watch Stand

A soft-looking cushion your watch wraps around, on a rounded base with a little tray for rings and cufflinks. For one watch or three. STL + 3MF · 1.6 MB View model
Three 3D-printed business card holders on a light oak desk, each holding a stack of blank white cards: a caramel holder with a black pen in its front trough, an olive green wave cradle and a white sloping wedge with a finger notch, a laptop and a small plant behind. $3.79 3ML-047 · Business card holder

Business Card Holder Set

Three softly rounded desk holders for your business cards: a sloping wedge, a wave cradle and one with a trough for your pen. STL + 3MF · 862 KB View model
Two joined 3D-printed spice stands in warm white on a wooden kitchen counter, each with three stepped shelves holding round glass spice jars of paprika, turmeric, herbs, pepper and chili flakes, with a basil plant and a cutting board behind. $3.79 3ML-039 · Spice rack

Modular Spice Rack

Three-step spice stands that slide together side by side, so you can print as many as your cupboard needs. Plus a pull-out tray for inside a cabinet. STL + 3MF · 54 KB View model
A red 3D-printed muscle car key holder on a light wall: the back of a fastback car with a silver bumper, a white plate reading WILLIAM, black tyres and four black hooks with house keys hanging from two of them.

97 new designs in the last 30 days

Get the Muscle Car Key Holder free.

Join the membership and this design is yours today, with every new design we release while you're a member. Every file comes with the license to sell your prints.

Cancel any time. What you download stays yours. See what members get